Table of Contents
Advertisement
All-in-One Chassis
Allows you to select All-in-One (AiO) Chassis (if applicable) for simplified AiO
configuration. Configuration options: [None] [1920*1080 LVDS1] [1920*1080
LVDS2] [1920*1080 LVDS3] [1600*900 LVDS4]
NOTES:
•
Be cautious when selecting AiO chassis. Incorrect selection of AiO chassis can cause
incorrect operation or potential damage to AiO chassis hardware.
The following items appear only when you set All-in-One Chassis to [None].
•
EDID Data Source
Configuration options: [Pre-Defined] [Flat Panel Display]
NOTE: The following item appears when you set EDID Data Source to [Pre-
Defined].
LFP Panel Type
Allows you to select LFP panel used by Internal Graphics Device.
Configuration options: [VBIOS Default] [640x480] [800x600] [1024x768]
[1280x1024] [1400x1050 LVDS1] [1400x1050 LVDS2] [1600x1200]
[1366x768] [1680x1050] [1920x1200] [1440x900] [1600x900]
[1024x768] [1280x800] [1920x1080] [2048x1536]
Inverter Polarity
Configuration options: [Normal] [Inverted]
Channel Select
Configuration options: [Dual Channel] [Single Channel]
Mode Select
Confuguration options: [JEIDA] [VESA 6bit] [VESA 8bit] [VESA 10bit]
DIGON enable to LVDS_ON enable(T2)
Configuration options: [0] ~[50]
LVDS_ON enable to BLON enable (T3)
Configuration options: [0] ~[1023]
BLON disable to LVDS_ON disable (T4)
Configuration options: [0] ~[1023]
24
EBS-I10
Advertisement
Table of Contents
