Advertisement
Quick Links
OWNERS GUIDE
Electro Polished SS
Pressure Vessel
Power Supply
(ME Series Shown)
Models: SS-10 / SV-10 / ME-10 / SS-20 / SV-20 / ME-20 – 120-VAC UVC Water Treatment Equipment
Table of Contents:
Page 2 – Shipping and Packing list, Safety Precautions, Pre-Treatment Requirements
Page 3 –SS Vessel Installation, Electrical Requirements, Power Supply Installation, Quartz and O-Ring Installation
Page 4 – Germicidal Lamp Installation, UVC Sensor Installation (FOR ME SERIES ONLY), Filling the UV Unit with Water,
Disinfecting the Piping System with Chlorine, Final Check
Page 5 – Annual Maintenance Procedure, 9000 Hour Timer Reset (FOR SV SERIES ONLY), UVLampMonitor (FOR SV
SERIES ONLY
Page 6 –UV Power Consumption, Replacement Parts, Warranty
Page 7 – Recommended Installation Diagram
LEAVE FOR HOMEOWNER
Advertisement
Related Manuals for Ultravation Aquatronic SS-10
Summary of Contents for Ultravation Aquatronic SS-10
- Page 1 OWNERS GUIDE Electro Polished SS Pressure Vessel Power Supply (ME Series Shown) Models: SS-10 / SV-10 / ME-10 / SS-20 / SV-20 / ME-20 – 120-VAC UVC Water Treatment Equipment Table of Contents: Page 2 – Shipping and Packing list, Safety Precautions, Pre-Treatment Requirements Page 3 –SS Vessel Installation, Electrical Requirements, Power Supply Installation, Quartz and O-Ring Installation Page 4 –...
-
Page 2: Shipping And Packaging List
WARNING: DO NOT operate outside of Vessel. In the event of accidental breakage or replacement of the ultraviolet lamp, please ensure that the lamp is disposed of in accordance with local and state environmental laws regarding fluorescent lamps containing mercury. www.ultravation.com... - Page 3 SHATTER. WHEN OPERATING, THE CLEAR all units. It is recommended you install a boiler GLAND NUT WILL GLOW BLUE. drain on the outlet piping of the unit for bacteria testing. www.ultravation.com...
- Page 4 4. Open cold water lines and flush out until chlorine 3. Plug the power supply into the surge protector (not odor is no longer detected. provided) then into dedicated electrical outlet. The germicidal lamp is now operating. Before consumption of water, an EPA Lab Test is suggested. www.ultravation.com...
- Page 5 Beep every (Every 5 year of operation reset stained, replace. 60 Minutes seconds) or replace lamps Flashing Red Beep every UV lamp(s) are not lit (Reference Quartz Installation) (Every 1 second) 1 second 8. Follow with germicidal lamp installation. www.ultravation.com...
-
Page 6: Warranty
Warranty: Ultravation warrants this product against any defects in material or workmanship for a period of 2 years after date of consumer purchase, with the exception of the Ultraviolet Lamp, which is warranted for a period of 90 days after date of consumer purchase.