qtran QOM-eLED+DALI-DT8 Manual

Led power supply 100w–300w

Advertisement

Quick Links

QOM-eLED+DALI-DT8
QOM-eLED+DALI-DT8 is an LED power supply for DALI 2 applications.
It utilizes a 100W constant voltage LED Driver from Thomas Research
and DALI 2 DT-8 Decoders. The unit is available in 100-300 watt
capacity. The power supplies and decoders are all prewired together
along with terminal blocks for power and control wires. The housing
can be surface mounted.
Part Number Builder
Product
Size
1
QOM-eLED
100W
200W
300W
Technical Information
1
Size
Max Load
Size
(Watts)
100W
1x100W
200W
2x100W
300W
3x100W
Voltage Drop Chart
10 AWG
Watts
VDC
(5.6mm2)
(W)
17
25
24
40
80
100
*Distances are based on a 5% Voltage drop max.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Output Wiring 1
2
Output Wiring 2
3
4
N/A
5
3
3
4
4
5
5
3
3
4
4
5
5
Output Wiring Options
2
3-Wire Light Engines: DW, DW-HE
4-Wire Light Engines: RGB
5-Wire Light Engines: RGBW, RGBW-HE
Secondary
Voltage
Max Prim Amps
(12/24VDC)
@ 120V
24VDC
0.95A
24VDC
1.90A
24VDC
2.85A
12 AWG
14 AWG
(3.3mm2)
(3.0mm2)
897'
564'
355'
567'
356'
224'
122'
309'
194'
130'
82'
51'
84'
53'
33'
LED POWER SUPPLY 100W–300W
2
Output Wiring 3
2
Prim. V
UNV
N/A
N/A
NOTE:
3
For customization or pre-programming contact a local sales rep.
4
DALI commissioning to be performed by a third party at time of
5
installation.
2
Output Wiring Options
3-Wire Light Engines: DW, DW-HE
4-Wire Light Engines: RGB
Max Prim Amps
5-Wire Light Engines: RGBW, RGBW-HE
@ 277V
0.40A
Color
3
0.80A
BK: Black Powder Coat Finish (Standard)
SS: 316 Marine Grade Stainless Steel
1.20A
16 AWG
18 AWG
(1.3mm2)
(0.78mm2)
223'
140'
141'
88'
77'
48'
32'
20'
21'
13'
COMPLIANT
Sec. V
Control
24VDC
DALI-DT8
20 AWG
22 AWG
24 AWG
(0.50mm2)
(0.33mm2)
(0.22mm2)
88'
55'
35'
56'
35'
22'
30'
30'
12'
13'
8'
8'
5'
Specification subject to change. Rev-12-20-22
Color
3
BK (Standard)
SS
26 AWG
(0.13mm2)
22'
14'
7'
5'
3'
3'

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QOM-eLED+DALI-DT8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for qtran QOM-eLED+DALI-DT8

  • Page 1 QOM-eLED+DALI-DT8 LED POWER SUPPLY 100W–300W QOM-eLED+DALI-DT8 is an LED power supply for DALI 2 applications. It utilizes a 100W constant voltage LED Driver from Thomas Research and DALI 2 DT-8 Decoders. The unit is available in 100-300 watt capacity. The power supplies and decoders are all prewired together along with terminal blocks for power and control wires.
  • Page 2 QOM-eLED+DALI-DT8 LED POWER SUPPLY 100W–300W LED DRIVER LED DRIVER LED DRIVER 1.36" (120V - 277V) (120V - 277V) (120V - 277V) DALI Signal DALI Signal DALI Signal in/out in/out in/out 1.07" LED groups 12-36VDC IN LED groups 12-36VDC IN LED groups...
  • Page 3: Specifications

    QOM-eLED+DALI-DT8 LED POWER SUPPLY 100W–300W Specifications (per 100W circuit) Protections Input 24VDC • Short Circuit Protection (SCP) Input Voltage (Vrms) Input Current, max (Arms) 0.98 0.51 0.43 • Over Voltage Protection (OVP) Inrush Current, max* (Apk) • Over Current Protection (OCP)
  • Page 4 QOM-eLED+DALI-DT8 LED POWER SUPPLY 100W–300W Wiring Diagram 3-Wire 4-Wire 5-Wire 12-36VDC IN VDC and LED connectors: Other connectors: AWG 24-16 AWG 20-16 0.2-1.5 mm 0.5-1.5 mm 0.35 inch 0.35 inch 12-36VDC IN LED groups 12-36VDC IN LED groups 12-36VDC IN...
  • Page 5 INSTALLATION LED POWER SUPPLY - QOM-eLED+DALI-DT8 • Must be installed by licensed electrician. • Wear rubber shoes and work on a sturdy wooden or fiberglass ladder. • This power supply must be installed according to the National Electric • Code and local codes and ordinances.
  • Page 6 INSTALLATION LED POWER SUPPLY - QOM-eLED+DALI-DT8 Housing 1.07" KNOCKOUT 5X (FOR 3/4" FITTINGS) 1.36" KNOCKOUT 4X (FOR 1" FITTINGS) 9.22" 4.90" ISOMETRIC VIEW BOTTOM VIEW Mounting Options 1.82" 3.38" 3.14" 0.25" 2.00" Surface Wall Mount 1/4”x2” wood screw or LAG bolt recommened...
  • Page 7: Primary Wiring

    INSTALLATION LED POWER SUPPLY - QOM-eLED+DALI-DT8 Connecting and Configuring the DALI-DT8 Decoder 3-Wire 4-Wire 5-Wire 12-36VDC IN VDC and LED connectors: Other connectors: AWG 24-16 AWG 20-16 0.2-1.5 mm 0.5-1.5 mm 0.35 inch 0.35 inch 12-36VDC IN LED groups 12-36VDC IN...
  • Page 8: Manual Configuration

    INSTALLATION LED POWER SUPPLY - QOM-eLED+DALI-DT8 Manual Configuration Digital display 1. Set address manually: 2. Set Output Type: Press and hold either button Press and hold both button (5 sec) (5 sec) Set Address Use the second button to Manual set button...
  • Page 9: Wiring Installation

    INSTALLATION LED POWER SUPPLY - QOM-eLED+DALI-DT8 Wiring Installation DALI Signal in/out LED DRIVER 2 LED DRIVER 2 LED DRIVER 2 (120 - 277V) (120 - 277V) LED groups 12-36VDC IN DALI Signal DALI Signal DALI Signal in/out in/out in/out LED groups...
  • Page 10 INSTALLATION LED POWER SUPPLY - QOM-eLED+DALI-DT8 CSA Requirements • Suitable for indoor use • This power supply must be installed according to the National Electric Code and local codes and ordinances and in accordance with applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

Table of Contents