Auto-Sensor - Deltaco DUR-798 User Manual

LED stays on while the scans are good.
LED on time:
Each increment of +1 on the barcode increases the LED on time with 10ms, max is 2 seconds.
Laser on trigger:
Each increment of +1 on the barcode increases the duration of the laser for 1s more, max is 9s.

Auto-sensor:

Setting:
When this function is on it can start related settings, when the setting is off, the bar code result is normal/default.
Setting bar code: choose code128, add "^3" before data source.
LED: on
20ms
1s
1s
5s
On
Off
On
25
LED: off
500ms
2s
3s
9s
Increase
Decrease
Off