Philips DVP3320 Service Manual page 12

Software upgrade
How to upgrade the software
1) Burn the data onto a blank CD-R or RW disc.
A. Procedure for software upgrade:
1) Power on the set and insert the prepared Upgrade
CDR.
2) The set will starts reading disc & response with
the following display TV screen:
Firmware Upgrade Erase and program.
Select OK to start upgrade.
3) Press <OK> button to confirm, then screen will
display :
Firmware Upgrade Programming, Please Wait...
Do not Switch the Player Off !
4) The upgraded disc will automatically out when
files coping complete, then take out the disc.
5) About 1 minute later, the tray will automatically
close when upgrading complete.
Region Code Change
1) Power on the set and open the tray door;
2) Press "9" "8" "7" "9" and press the region
code number (0-6) on the remote control.
Notes:restart after above steps.
Great user manuals database on
Loading
OK Cancel
UserManuals.info
4-1
B. Read out the Firmware version to confirm the
upgrading
1) Power on the set and Open the tray door.
2) Press <9><6><6>button to check the software
information.
The software version and other information are
display on the TV screen as follows:
BE Version: DVP33XX_XX.XX
FE Version: XXXX.XXXXXX
DSP Version: DSP.XX
Region Code: X
Caution: The set must not be power off during
upgrading, Otherwise the Main board will be
damaged entirely.