PEUGEOT e-2008 Handbook page 108

After changing a wheel
With a "space-saver" type spare wheel
Deactivate certain driving aid functions
(Active Safety Brake, Adaptive cruise control,
etc.).
Do not exceed the maximum authorised
speed of 50 mph (80 km/h).
Driving with more than one "space-saver"
type spare wheel is prohibited.
workshop as soon as possible to have
the tightness of the bolts and the pressure of
the spare wheel checked.
Have the punctured tyre examined. After
inspection, the technician will advise you on
whether the tyre can be repaired or if it must
be replaced.
Changing a bulb
In some weather conditions (e.g. low
temperature or humidity), misting on the
internal surface of the glass of the headlamps
and rear lamps is normal, and will disappear
107
after the lamps have been on for a few
minutes.
Never look too closely at the luminous
beam of LED or Full
LED technology headlamps: risk of serious
eye injury!
The headlamps have polycarbonate
lenses with a protective coating:
– Do not clean them with a dry or abrasive
cloth, nor with detergent or solvent
products.
– Use a sponge and soapy water or a pH
neutral product.
– When using a high-pressure washer on
persistent marks, do not keep the lance
directed towards the headlamps, lamps or
their edges for too long, so as not to damage
their protective coating and seals.
Changing a bulb must only be done with
In the event of a breakdown
minutes - risk of serious burns!
Do not touch the bulb directly with your
It is essential only to use anti-ultraviolet
(UV) type bulbs, so as not to damage the
headlamp.
Always replace a failed bulb with a new bulb
lighting imbalance, replace the bulbs in pairs.
Perform the operations in the reverse
order to dismantling.
Light-emitting diode (LED)
headlamps and lamps
headlamps / lamps are:
– "LED" technology headlamps.
– Full LED technology headlamps.
– Front foglamps.
–
– Direction indicator side repeaters.
– Side spotlamps.
– 3D rear lamps.
– Third brake lamp.
– Number plate lamps.