Delta Components DeltaVarioMon DM 1130 Series Manual page 25

DELTA COMPONENTS GmbH
2. To start the installation press the "Next >"-Button.
Following dialog will be showed: The selection box "Install PS/2 interface driver" should not be selected;
otherwise the driver for PS/2 Touch will be installed. Complete the dialog with "Next>".
3. In the next window you can select the date for the calibration. There are three options:
1. At every start of the computer, the calibration tool will open.
2. Only by the next start of the computer the calibration tool will open.
3. The calibration tool will not open but it can be manual open after installation.
 The third selection is the standard setting. The calibration can be done later manual.
D E L T A C O M P O N E N T S G m b H  Auweg 27, D-79761 Waldshut-Tiengen
Manual
DeltaVarioMon 8,4'' LED
Seite 25