Advertisement
Packaging list
Handset Cord
IP Phone
Handset
Screen icon
Call forward activated
In hands-free mode
Disable do not
In headset mode
disturb (Blue)
Do not disturb
In handset mode
activated (Red)
Mute activated
SIP Hotspot activated
VLAN activated
Silent mode
Call is on hold
VPN activated
Auto-answering
New SMS
SMS
activated
Keys features
Call transfer key
Conference key
Line keys
Phonebook key
Soft keys
Call logs key
Message waiting indicator
Voice messages key
Headset key,
activate/deactivate headset
Left and right navigation keys
Up navigation key, Shortcut
to call log
Status key
Down navigation key, Shortcut to
Status OK key, Shortcut to Menu
Redial key, access to redial
the last record
Hold key, Hold/Resume the call
Ethernet Cable
Quick Installation Guide
Stand
Power Adapter
Wall Stand
(Optional)
(Buy separately)
New VM messages
Internet connected
Voice quality level
Internet is disconnected
of call
X
Keypad locked
No IP address
!
Wireless network
Forward call(s)
connected
Wireless network
Missed call(s)
disconnected
Received call(s)
Wireless network failure
Dialed call(s)
In idle mode: activate/deactivate
silent mode
In communication mode:
mute/un-mute a call
In idle mode or during ringing:
increase or decrease ringer volume
In communication: increase or
decrease handset, headset or
hands-free volume
Hand-free key, activate/deactivate
hands free
Long press to lock keypad.
Enter PIN to unlock keypad (default 123)
- 2 -
Installation the device
Please follow the instructions in below picture to install the
device.
Bracket desktop installation
Wall mounting (wall stand need buy separately)
Connecting to the device
Please connect power adapter, network, PC, handset, and
headset to the corresponding ports as described in below
picture.
① Power port: connect the power adapter.
② Network port: connecting local area network or Internet.
③ PC port: the network port connect to the computer.
④ Headset port: connect headset.
⑤ Handset port: connect IP Phone handset.
Internet
PC
Headset
5V
Handset
Network connect
Using Ethernet
1．The power on the device and connect the WAN port of the
phone to the RJ45 socket of a hub/switch or a router
(LAN side of the router) using the Ethernet cable.
2．The default is DHCP mode.
Using WiFi
1．The power on the device and make sure the phone is idle.
2．Press Menu > Basic > WLAN, Enabled the WiFi Feature.
3．Press scan to search for currently available wireless network.
4．Enter the available network and select the WiFi you want to
connect.
5．Press connect soft key and enter the appropriate password
to connect to the WiFi. The default is DHCP mode.
Configuration
Configuration via LCD menu of phone
1．Press Menu > Advanced (default password 123).
2．Select Network: To configure the Network Settings
(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE)
3．Select Accounts: To configure enable the account, fill the
SIP server address, port, user name, password etc .
Configuration via web
1. Get the IP address from the phone: Press
key, or Menu
> Status > IPv4 / IPv6.
2. Login: Input the IP address in the web browser. The PC and
phone should be in the same IP address segment(The default
username and password are both 'admin'.)
3. Configure: Select network/account etc, and fill the
relevant content.
4. Save the configuration.
Language setting
1. Press Menu key > Basic > Language.
2. Select the desired language and press OK soft key.
Making a call
1. Pre-dialing: enter the phone number and pick up the handset.
2. Direct dialing: lift the handset and enter the phone number.
3. Handsfree: enter phone number and press
or vice versa.
4. Headset: enter phone number and press
or vice versa.
5. Designated line: press line key, enter phone number and
press dial key.
Accepting a call
1. Using the handset: pick up the handset.
2. Using the headset: press
.
3. Using the handsfree: press
.
- 3 -
Advertisement
