Chengdu Ebyte Electronic Technology Co., Ltd.
5 Basic Application
5.1 Basic Circuit
Note: The L1 inductor is a protective device used to prevent the device from being damaged due to excessive input
power of the antenna. The user should add this inductor when using the module.
6 FAQ
6.1 Communication Range Is Too Short
The communication distance will be affected when obstacle exists;
Data lose rate will be affected by temperature, humidity and co-channel interference;
The ground will absorb and reflect wireless radio wave, so the performance will be poor when testing near ground;
Sea water has great ability in absorbing wireless radio wave, so performance will be poor when testing near the sea;
The signal will be affected when the antenna is near metal object or put in a metal case;
Power register was set incorrectly, air data rate is set as too high (the higher the air data rate, the shorter the
distance);
At room temperature, the low voltage of the power supply is lower than the recommended value. The lower the
voltage, the lower the output power;
Due to antenna quality or poor matching between antenna and module.
Copyright ©2012–2019,Chengdu Ebyte Electronic Technology Co., Ltd.
E220-400MM22S User Manual