Table of Contents
Advertisement
Quick Links
incl. IRBIS
InfraTec GmbH
Infrarotsensorik und Messtechnik
Gostritzer Straße 61 – 63
01217 Dresden/GERMANY
VarioCAM
®
remote 3.0 software description
User Manual
Last reviewed: December 2012
Phone
+49 351 871-8615
Fax
+49 351 871-8727
E-mail
service@InfraTec.de
www.InfraTec.de
®
hr head
© InfraTec 2012
(All the stated product names and trademarks remain in
property of their respective owners.)
Advertisement
Table of Contents
Related Manuals for InfraTec Jenoptik VarioCAM
Summary of Contents for InfraTec Jenoptik VarioCAM
- Page 1 VarioCAM hr head incl. IRBIS ® remote 3.0 software description User Manual Last reviewed: December 2012 © InfraTec 2012 InfraTec GmbH Phone +49 351 871-8615 (All the stated product names and trademarks remain in Infrarotsensorik und Messtechnik +49 351 871-8727 property of their respective owners.)
-
Page 3: Table Of Contents
Focus Mode ..........................33 Spot Editor* ..........................34 Stop Mode and Data Storage ...................... 37 The Main Menu ..........................39 9.6.1 Menu "Image" ..........................39 9.6.2 Menu "File" ........................... 44 9.6.3 Menu "Measure" ........................... 49 User Manual © InfraTec GmbH 2012... - Page 4 Controls for Direct Control ......................71 10.2.6 Allocation of Functional Keys ....................... 72 Maintenance of the Device ..................73 11.1 Cleaning ............................73 11.2 Calibration ............................ 73 Environmental Protection ..................74 Service ......................... 75 Index ..........................76 © InfraTec GmbH 2012 User Manual...
-
Page 5: Introduction
JENOPTIK Laser, Optik, Systeme GmbH. This instruction manual was compiled with the necessary diligence. No liability is accepted for damage arising from non-observance of the information contained in this instruction manual. Any product names and trademarks mentioned herein remain the property of their respective owners. User Manual © InfraTec GmbH 2012... - Page 6 Typical applications of the thermographic system include: ■ Inspection of electrical and mechanical systems and power units ■ Optimisation of components and units ■ Control of process temperatures ■ Quality assurance © InfraTec GmbH 2012 User Manual...
-
Page 7: Advice On Device Safety
EN 61010-1:2001 Safety requirements for electrical equipment for measurement, control and laboratory use – Part1: General requirements (IEC 61010-1:2011) ■ EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use – EMC Requirements – Part1: General requirements (IEC 61326-1:2005) User Manual © InfraTec GmbH 2012... - Page 8 Lens changes should not be carried out in rooms of high dust load or humidity, since IP 54 protection class is not guaranteed with the lens removed. © InfraTec GmbH 2012 User Manual...
-
Page 9: Technical Description
(6 x 4) close-up lens focal length (mm) focus (mm) field of view (mm²) resolution (μm) close-up 0.17x for 25 (80 x 60) close-up 0.5x for 25 (27 x 20) microscopic lens 1.0x (13 x 10) User Manual © InfraTec GmbH 2012... - Page 10 ■ Gain and offset correction ■ Defective pixel treatment ■ Low-pass filtering ■ Zoom generator ■ Graphic overlay ■ FireWire (IEEE 1394) interface ■ Embedded PC interface ■ Standard-format video-image generator (PAL/NTSC-FBAS, S-Video, RGB) © InfraTec GmbH 2012 User Manual...
- Page 11 PC interface card. Please note the specification of the used interface card and the power input of the thermographic system. In case of cable lengths > 5 m, power should principally be supplied via the external power supply unit or the rechargeable battery. User Manual © InfraTec GmbH 2012...
- Page 12 The FireWire (IEEE 1394) interface*, in connection with the software packages IRBIS remote* and ® IRBIS online*, permits to remote-control the thermographic system and the real-time transfer* of digital image information to a PC. © InfraTec GmbH 2012 User Manual...
-
Page 13: Technical Data
* (Properties and technical specifications are dependent on the camera configuration and vary in the equipment packages VarioCAM hr head. Design and specifications are subject to permanent improvement; subject to changes in the sense of technical progress.) User Manual © InfraTec GmbH 2012... -
Page 14: Unpacking And Checking
Card adapter for SD card ■ Breakout Box, system cable, 14- pin, trigger cable ■ LWL interface for FireWire (IEEE 1394) ■ Tripod for device ® ■ Thermographic software of the IRBIS programme family © InfraTec GmbH 2012 User Manual... -
Page 15: Description Of Camera Parts
Power supply unit without adapter ■ Fig. 2 Side view FBAS cable ■ Breakout Box (via system cable) ■ Universal cable (RS 232, FBAS, S video) SD card slot Lens Fig. 3 Front view User Manual © InfraTec GmbH 2012... -
Page 16: Quick Start
Start the software, connect the camera with the software and open the “”Remote Control” window to operate the camera in the camera-menu. ■ Remove cover from SD card slot, insert SD card into card slot and return cover. © InfraTec GmbH 2012 User Manual... -
Page 17: Display
■ Pressing the Enter button switches between the live mode and the focus mode. In the focus mode, buttons , ■ focus over larger or shorter distances to the object. User Manual © InfraTec GmbH 2012... -
Page 18: Data Storage
You navigate in the main menu by moving the buttons , , , ■ and select the functions by pressing Enter. Switching OFF ■ The camera is switched off as soon as the electricity supply is interrupted to the camera. © InfraTec GmbH 2012 User Manual... -
Page 19: Data Transfer To The Computer
■ For inserting the analysed thermal images into your reports, select the function "Copy to clipboard" in the "Edit" menu. You can also use the report generator. ® Fig. 10 IRBIS Software User Manual © InfraTec GmbH 2012... -
Page 20: Starting Up
The lettering on the lens will then face up. In this position, the lens is gently pushed against the corpus of the camera; the lens-fastening ring is unlocked and automatically turns to the right. Finally, the lens-fastening ring is fully locked by gently pushing it to the right. © InfraTec GmbH 2012 User Manual...
Need help?
Do you have a question about the Jenoptik VarioCAM and is the answer not in the manual?
Questions and answers