Page 1: Table Of Contents
IND055 Controller Diagram Sample 2-Wire Installation Diagrams Re-Programming Floors Re-Programming Messages Re-Configuring System Re-Configuring Inputs 2-Wire Mk.3 Features Dipswitch Settings sales@drucegrove.com www.drucegrove.com Tel: +44 (0) 1992 650486 Fax: +44 (0) 01992 652226 Drucegrove Ltd, 6 Printers Way, Harlow, Essex, CM20 2SD, UK...
Page 2: Lcd Display Overview
(2) Gongs will sound a single tone for , a double Hush input for speech and gongs tone for , and will not sound for . sales@drucegrove.com www.drucegrove.com Tel: +44 (0) 1992 650486 Fax: +44 (0) 01992 652226 Drucegrove Ltd, 6 Printers Way, Harlow, Essex, CM20 2SD, UK...
Page 3: Basic Navigation
Basic Overview of the IND055 Interface Page 3 The IND055 has five operational “modes”. The controller is in the default “normal” mode (shown below) after power up and while the lift is in operation. There are then three menu modes for reconfiguring different aspects of the configuration.
Page 4: Ind055 Controller Functionality
IND055 Controller Functionality The IND055 is the Master Controller of the 2-Wire™ system, the only system on the market that requires just two wires to carry both the power and data signals to run and activate indicators, TFT displays, gongs, hall lanterns and speech units.
Page 5: Sample 2-Wire Installation Diagrams
= Static/Scrolling Car Arrow Switch DIRECTION INDICATOR * if applicable LIFT CAR 2-WIRE SYSTEM ® Digitalker Speech Unit located in the motor room. Speech enabled on landings via Drucegrove GNG2202 Electronic Gong with Speech. LANDINGS 2-Wire Digitalker EXTERNAL EXTERNAL HALL LANTERN HALL LANTERN...
Page 6: Re-Programming Floors
The Red and Black keys will need to be pressed together & released three times to return to normal mode. sales@drucegrove.com www.drucegrove.com Tel: +44 (0) 1992 650486 Fax: +44 (0) 01992 652226 Drucegrove Ltd, 6 Printers Way, Harlow, Essex, CM20 2SD, UK...
Page 7: Re-Programming Messages
“NO ENTRY” symbol will replace the scrolling message. It is recommended that interweave of messages and scrolling floors is switched off. sales@drucegrove.com www.drucegrove.com Tel: +44 (0) 1992 650486 Fax: +44 (0) 01992 652226 Drucegrove Ltd, 6 Printers Way, Harlow, Essex, CM20 2SD, UK...
Page 8: Re-Configuring System
2-Wire Output Mode is set to either “2-Wire Mk.3” Mk.3 or “2-Wire Mk.2 + Mk.3”. continued on next page... sales@drucegrove.com www.drucegrove.com Tel: +44 (0) 1992 650486 Fax: +44 (0) 01992 652226 Drucegrove Ltd, 6 Printers Way, Harlow, Essex, CM20 2SD, UK...
Page 9 Tel: +44 (0) 1992 650486 Fax: +44 (0) 01992 652226 Drucegrove Ltd, 6 Printers Way, Harlow, Essex, CM20 2SD, UK...
Page 10: Re-Configuring Inputs
Press Black Speech Included Configure Inputs Enables/disables speech announcements. Speech Included   BACK NEXT continued on next page... sales@drucegrove.com www.drucegrove.com Tel: +44 (0) 1992 650486 Fax: +44 (0) 01992 652226 Drucegrove Ltd, 6 Printers Way, Harlow, Essex, CM20 2SD, UK...
Page 11 The new input configuration will be displayed on the final “Save & Exit” page. If multiple input boards are required, use the gray and blue buttons to scroll between pages. sales@drucegrove.com www.drucegrove.com Tel: +44 (0) 1992 650486 Fax: +44 (0) 01992 652226 Drucegrove Ltd, 6 Printers Way, Harlow, Essex, CM20 2SD, UK...
Page 12: 2-Wire Mk.3 Features
Car Direction Arrow Configuration The display mode of car direction arrows can be configured from the IND055 to either be hidden everywhere, shown on the car position indicator only, shown on the landing position indicators only, shown on all position indicators, or “Auto”.
Page 13 Normally, a FireFly is configured via an 8-way dipswitch on the back of the indicator. The colour and layout options can be overridden from the IND055, and in addition to the 8 colour options provided via the dipswitches, a custom foreground and background colour may also be configured.
Page 14: Dipswitch Settings
Floor / Arrow Scrolling In “Normal Mode” the 8-way dipswitch on the IND055 determines the scrolling value (0 to F) for an indicator floor change, which can be modified by using dipswitches 1 to 4 to give the speeds below:...