Table of Contents
Advertisement
CLEANING AND MAINTAINANCE
Reminder: Regular cleaning is essential for optimum performance
• Do not use chemical cleaning agents.
• Disconnect the power supply before cleaning the air cooler to avoid
electric shock.
1. Cleaning the air filter and filter screen
Disconnect power supply and remove the air filter screen. Remove the filter and
rinse it with tap water. Use a banister brush to clean the plastic filter mesh, wash
it with tap water and let it dry.
2. Cleaning the water tank
Disconnect power supply and pull out the water tank, please note it does not
completely detach from the unit. Remove the dirt in the tank by using a wet towel
to remove any dirt.
3. Cleaning the body
Disconnect the power supply. Clean the body with a mild detergent and a soft
and damp cloth. Do not allow water to get in or on the control panel.
TROUBLE SHOOTING
1.
If the air is not cool:
a.
b.
c.
d.
e.
3.
If water is leaking from the unit:
a.
b.
c.
Ensure that there is water in the cooler.
Make sure that the rotating filter pad is moving.
Make sure the window or door is open and that there is
sufficient ventilation
Switch the cooler on in the morning before it gets too hot.
If the room size is large, try to cool specific areas instead if
the whole room.
Make sure that the drainage plug is firmly in place.
Check that the water reservoir is not overfilled.
Ensure that the ice tray is not overfilled.
8
Advertisement
Table of Contents
