Do you have a question about the VISTA Pro and is the answer not in the manual?
Questions and answers
Summary of Contents for Gemlogis VISTA Pro
Page 1
QUICK START GUIDE VISTA Pro Earth Mined and HPHT/CVD Segregator Model No.: GEM-0020-01 V-01B...
Page 2
VISTA Pro UV Reflection Tester 1 x VISTA Pro Tester 1 x Universal Charger DC INPUT 8.4V Note: Charge device for at least 1 hour A-Latch prior to using it for the first time B-Ratatable Lid cover E-Test Platform C-Display Area...
Page 3
TO PERFORM TEST (1) POWER ON (II) (I) Press and hold the POWER/TEST button for 3 seconds to turn on the device. Note: The lid cover must be closed prior to powering on. (II) Turn the rotatable lid cover to reveal the testing platform. The device is ready for testing...
Page 4
(2) TO TEST LOOSE STONE (II) (III) (I) Use one hand to push down the latch to separate the test probe from the platform. Meanwhile, use another hand to rotate the test platform to select a suitable slot for the stone. (II) Pick up a loose stone using a tweezer and place the stone on the platform pit.
Page 5
(3) TO TEST STONE MOUNTED ON RING (II) (I) Use one hand to push down the latch to separate the test probe from the platform. Place the ring with another hand onto the platform. (II) Slowly release the latch to allow the probe to contact with the table center of the stone. (III) Close the Lid Cover and press the POWER/TEST button to begin testing.
Page 6
(4) TO TEST STONE MOUNTED ON BRACELET AND NECKLACE (II) (III) (I) Pull down the left and right brackets beside the platform. (II) Use one hand to push down the latch to separate the test probe from the platform. Place the bracelet or necklace with another hand onto the platform.
Page 7
(5) TO TEST STONE MOUNTED ON EARRING WITH STUD (II) (III) (I) Use one hand to push down the latch to separate the test probe from the platform. Meanwhile, use another hand to rotate the test platform to select a suitable slot for the earring. (As shown above) (II) Place and insert the stud of the earring with another hand into the platform.
Page 8
Recommend to send the stone to a gem laboratory for further examination. Remarks: *The Gemlogis Vista Pro does not specifically confirm whether a natural diamond has been enhanced by HPHT treatment. * Results may differ if the table of the gemstone is not touching the Detector Rod.
PRODUCT FEATURES: - A compact, convenient tester to determine if a gemstone is Earth Mined (Natural) or HPHT treated/Lab Created (CVD) Diamond. - Tests loose stones and stones with different type of mounting, from .02ct to12 ct - Colorless Diamond (D-J color) - Portable - Battery Status indicator: Red LED constant = Full, Red LED Blinking = Low Battery - One year factory warranty...
Page 10
Due to continuous product enhancements, Jubilee Diamond Instrument reserves the right to revise all documents including the right to make changes the handbook without notice and without obligation to notify any person of such revisions or changes. Users are advised to check Gemlogis’ website for latest updates. http://www.gemlogis.com...
TERMS & WARRANTY: - This product is covered by 12 month Factory Warranty - Defects in material and workmanship are covered under this warranty - Warranty will be voided by unauthorized repair, modification, tempering, accidental damage, negligence or improper use - Warranty period takes effect from the date of original purchase - Original Invoice must be shown in order to exercise the terms of factory warranty - In the event that this model is no longer available or has been discontinued but warranty coverage is...
Need help?
Do you have a question about the VISTA Pro and is the answer not in the manual?
Questions and answers