Stirling STR-H239W1 Quick Start Manual

A

Installation

CAUTION! The fridge is heavy - transport it with care! To avoid back or other injury, we
recommend you ask someone for help or use a mechanical aid when moving it.
1

Getting it ready for use

Before you start installing the fridge, wipe the interior surfaces and accessories with a
well wrung out cloth moistened with lukewarm water with a little baking soda added.
This will remove any dust from transit and storage and help remove the typical smell of a
brand new product. Dry thoroughly.
2

Need the doors reversed?

Your new upright fridge has the capability of the door opening from the right or left
side. If your set-up requires reversal of the door swing, please follow the instructions on
pages 16–17 of the supplied manual.
3

Where to install

The fridge is designed for freestanding use. The floor must be strong, sturdy and level—
adjust the levelling feet, if necessary. Avoid areas where the fridge would be exposed to
direct sunlight, heat, extreme cold ambient temperatures or excessive moisture and high
humidity. Installing it in the coolest area of the room will save energy consumption and
running costs. Allow at least 12 cm clear space at the back and 5 cm at the sides so air
can circulate freely around the fridge.
For comprehensive installation instructions, please consult the manual.
Before plugging in your new fridge, let it stand upright for at least 4 hours to allow
Plug in the fridge and secure the power supply cord behind the unit, making sure
Quick Start Guide
242 L upright fridge ready to use!
the refrigerant gases to settle into the compressor.
the plug is accessible after installation.
When first starting up, and after a period out of use,
allow the unit to cool down on the coldest setting
(7) for at least 2 hours before placing perishable
Model: STR-H239W1
Let's get your new

Connection

Settling

Power connection

Cool down

food in the fridge.
Nearly done! Just a bit more on
the other side of this page...
B
4
5
6