FERRANTI DOG KENNEL COCKER Assembly Manual

ASSEMBLY MANUAL
DOG KENNEL - COCKER MODEL
DOG KENNEL
COCKER Model
Ferranti s.r.l. Unipersonale
Via Vicinato n. 43 - Frazione Fratta - 06036 Montefalco (PG) - Italy
Tel. (+39) 0742 399096
ASSEMBLY MANUAL
EN - Translation from the original language (Italian)
Dear Customer,
Thank you for purchasing a FERRANTI product.
Please consult this assembly manual carefully
before proceeding with any operation on the
product.
OBLIGATION
INTRODUCTION
This assembly manual reflects the technique at the time of pur-
chase and the specifications in force at the current date of edi-
tion; it contains the information necessary for correct installation,
cleaning and disposal of the product at the end of its life.
FERRANTI S.R.L. reserves the right to make modifications,
changes or improvements to the manual or to the product at any
time and without notice.
Use only the original mounting components provided.
The manufacturer is not liable for damage to
property, persons and animals caused by ac-
cidents due to failure to comply with the in-
structions in this assembly manual.
ATTENTION
The images are purely indicative and do not constitute a
commitment for the manufacturer and/or the Distributor.
Any proposal by the Customer regarding improvements to be
made to the product will be welcomed by FERRANTI S.R.L.,
which will evaluate their implementation.
INTENDED USE (PERMITTED USE).
The product in question has been designed for the housing and
keeping of animals.
The inner dog house is suitable for 20-45 kg / 50-70 cm large
dog breeds, (such as: female Shepherd, female Dobermann,
English Setter) and for 18-40 kg / 50-63 cm medium dog
breeds, (such as: Golden retriever, Boxer, Collie, Labrador, Bor-
der Collie).
IMPROPER USE (NOT PERMITTED).
Any use other than the permitted one is to be considered "im-
proper use"; the Manufacturer therefore declines all responsibil-
ity for any damage caused to property, animals and/or persons.
GENERAL DESCRIPTION
The dog kennel, mod. Cocker consists of:
- structure in hot galvanized steel mesh, mesh 5x3 cm, wire 0.29
mm, buffered with panels in marine plywood treated with im-
pregnating agent, 1.5 cm thick; gates dimensions 53(L)x105(H)
cm;
- Inner wooden dog house (from 120x65- 82x59, with "anti-bite"
entrance from 30x50, that can be inspected by lifting the roof
and complete with bench raised from the ground, removable
and washable;
- front in hot-dip galvanized mesh, complete with gate with hook
info@ferrantinet.com - www.ferrantinet.com
Rel. 08-2022 - Rev. 0