Memorex MVDR2102 User Manual page 32

SCREEN SAVER
1
1
2
Enter the GENERAL Setup page as described on page 27.
Then, select SCREEN SAVER using the Navigation (π,†)
buttons 1, then the Navigation (®) button 1 to select it.
Turn the Screen Saver ON or OFF using the Navigation
(π,†) buttons 1, then press the ENTER button 2.
When this option is set to ON, the screen saver will come
on when a disc is paused for approx. 5 minutes.
When this option is OFF, the screen saver will not come on.
USER DEFAULT
1
1 2
Performing this step will reset the unit's options (time,
preferences, etc.) to their factory settings.
Enter the GENERAL Setup page as described on page 27.
Then, select USER DEFAULT using the Navigation (π,†)
buttons 1, then the ENTER button 2 to select it.
Select either OK (to reset the unit) or CANCEL using the
Navigation (√,®) buttons 1 followed by the ENTER
button 2.
Once you have selected OK to reset the unit, all the Timer
Recording programs will be erased. Also, you will have to
set the Initial Setup again (see page 19 for Initial Setup
Wizard instructions).
(Please see additional information in NOTES right.)
INITIAL SETUP MENU (CONTINUED)
AUTO GO TO (For DV Input)
1
1 2
Enter the GENERAL Setup page as described on page 27.
Then, select AUTO GOTO DV using the Navigation (π,†)
buttons 1, then the Navigation (®) button 1 to select it.
Turn "AUTO GOTO" ON or OFF using the Navigation (π,†)
buttons 1, then press the ENTER button 2.
When this option is set to ON, the unit will automatically
switch to the DV input when a DV plug is inserted (with the
power on) into the front DV jack. When this option is OFF,
the feature is not activated.
NOTES:
• Make sure there is no disc inside the disc tray when
attempting to reset the unit; otherwise, you may not
be able to select the USER DEFAULT setting.
• To return to the previous row of options, press the
Navigation (√) button.
• To exit setup, press the SETUP button.
29