Technical Support; Bios Introduction; Storage Selection; Serial Ports Switching - Icop EB-3362-I Series User Manual

EB-3362-I

4 Technical support

4.1 BIOS Introduction

Featuring AMI BIOS, EB-3362-I is a one stable module board for your
applications. In this section, we will introduce you some basic AMI BIOS setting
such as selecting storage and selecting COM port function.

4.1.1 Storage Selection

Main storage is set to SATA DoM as default on EB-3362-I. If SD card is
required as main storage, please follow the following to change BIOS setting:
Path: Advanced > IDE Configuration > Primary IDE Pin Select >
SD Card

4.1.2 Serial Ports Switching

Serial ports are set RS232 or RS485 as default on EB-3362-I. If you would like
to change serial port setting, please follow the following to change BIOS setting:
Path: Advanced > Serial/Parallel Port Configuration > TXDEN
ICOP Technology Inc.
User Manual
13