Advertisement
Quick Links
Model: R200
__(1) Hardware pack
__(2) Sideframes
__(2) Rocker bottoms
__(1) Back insert
__(1) Seat insert
__(1) Seat frame
__(1) Long brace
__(1) Short brace
__(1) Head piece
TOOLS NEEDED
4mm Hex Key, Allen, T-handle
INCLUDED
4mm Hex Key for Drill: INCLUDED
Qty.
Description
A - 1/4-20 X 2-1/2 WAFER SHCS
4
B - .27 X 3 SOCKET WAFER A
12
ASSEMBLY INSTRUCTIONS
Step 1
Attach long brace, short brace and
seat frame with (4) .27x3" screws.
Attach back frame with (2) 2 1/2" bolts
Note: front of seat is wider
seat frame
short brace
long brace
Step 2
Place head piece into top of post
Place seat insert into sideframe
Repeat step 1 on other side
B
ALL HARDWARE IS COATED STAINLESS STEEL
Step 3
Attach rocker bottomwith (4) .27x3" screws
head
NOTE: Partialy thread both screws
into post before tightening.
Rocker bottoms may require some
flexing for proper fit.
seat
insert
A
back
insert
sideframe
A
B
B
11/21/2012
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Polywood R200
Summary of Contents for Polywood R200
- Page 1 Step 1 Attach long brace, short brace and seat frame with (4) .27x3” screws. Model: R200 Attach back frame with (2) 2 1/2" bolts back insert sideframe Note: front of seat is wider __(1) Hardware pack __(2) Sideframes seat frame...
- Page 2 Attach a tray to the middle of the leg assemblies by resting tray on the leg assemblies Uses (4) 8x3 screws Model: TWST, BST Note: Trays do not have pilot holes. Screws go directly into Polywood without pilot holes __(2) Trays __(2) Leg assembly __(1) Hardware pack TOOLS NEEDED...
Need help?
Do you have a question about the R200 and is the answer not in the manual?
Questions and answers