Winter Application - AquaScape 48026 Instructions & Maintenance

EXTEND PIPING TO INSTALL DUAL UNION CHECK
VALVE 2.0 CONTINUED
• Glue a PVC coupling onto
the pipe (Ex. 6).
• Glue a new section of PVC
pipe into the PVC coupling
to extend the pipe into the
filter (Ex. 7).
• Then, glue the pipe
directly into the new fitting
(Ex. 8).
• Connect the check valve
assembly (Ex. 9).

Winter Application

When winterizing your pump, we recommend removing the check valve with the pump and storing both in a frost-free location
to prevent any freeze damage to the check valve or plumbing. One-Year Limited Warranty does not cover damage resulting
from lack of reasonable maintenance or care.
For installation with the 8-PN Solids-Handling Pond Pumps, refer to the 8-PN Check Valve Installation Guide.
#48026 • 08/19
4
For more information about our company or products, please visit our website at aquascapeinc.com
or call us at US (866) 877-6637 CAN (866) 766-3426
©2019 Aquascape, Inc. • All Worldwide Rights Reserved
EXTEND THE HEIGHT TO INSTALL DUAL UNION
CHECK VALVE 2.0 CONTINUED
• When installing the Dual Union Check Valve 2.0 in a taller
filter, a height extension may be necessary. This can be
easily accomplished by cutting a section of 2" PVC pipe
to the required length and gluing it into the fittings using
PVC cement. When installing the Dual Union Check Valve
2.0 in a Pondless
more Pondless
Ex. 6
each extension will require the addition of a 7" section of
PVC pipe (Ex. 10).
Pondless Waterfall Vault
®
Ex. 7
Ex. 8
Ex. 9
☎
US (866) 877-6637 |
Waterfall Vault (#49000) with one or
®
Waterfall Vault Extensions (#49001),
®
Pondless ®
with Vault Extension
☎
CAN (866) 766-3426 | aquascapeinc.com
Waterfall Vault
Ex. 10