Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Ramblegard Pre-Sense RG50
- Page 1 Pre-Sense (RG50) User Instructions...
- Page 3 Ensuring safety whilst providing dignity for the patient PreSense is an intelligent infra-red occupancy sensor that is activated when a toilet is occupied, alarming only when the patient attempts to leave the toilet. This device can also be used as an alternative to a chair or bed pad in a lounge, bedroom or ward setting for example.
- Page 4 1. Set-Up Each Pre-Sense unit is shipped in sleep mode with the batteries already installed. 1.1 To activate the unit, swipe the magnetic reset point (as illustrated on face of unit) with the magnetic key to initiate a 10 second start-up sequence. The LED will flash white followed by 3 red flashes and 2 green flashes before turning blue.
- Page 5 1.4 PAUSE Mode It is possible to pause the alarm in some instances e.g. if staff need to clean the area near the sensor. To do this: i) Using the magnetic key, swipe magnetic area on the face of the unit. The yellow LED will blink and then flash slowly (once a second) to show the PAUSE feature is active.
- Page 6 1.6 Changing Activation Distance When you receive the Pre-Sense unit it will be set at a predetermined distance. Should you need to increase this, it can only be changed within the first 90 seconds from start-up: i) Take battery out and replace after 3 seconds. ii) Replace battery enclosure and place the unit in it’s new position.
- Page 8 T: 028 9448 3971 www.ramblegard.com S&E CareTrade t/a Ramblegard Elmfield House Rathenraw Industrial Estate Greystone Road Antrim BT41 2SJ...
Need help?
Do you have a question about the Pre-Sense RG50 and is the answer not in the manual?
Questions and answers