Table of Contents
Advertisement
Professional Liner Inserts
Model
Width
CSPI-30
28 3/8"
CSPI-36
34 3/8"
CSPI-42
40 3/8"
CSPI-48
46 3/8"
CSPI-54
52 3/8"
CSPI-60
60 3/8"
CSPI-302
28 3/8"
CSPI-362
34 3/8"
CSPI-422
40 3/8"
CSPI-482
46 3/8"
CSPI-303
28 3/8"
CSPI-363
34 3/8"
CSPI-423
40 3/8"
CSPI-306
28 3/8"
CSPI-366
34 3/8"
CSPI-426
40 3/8"
CSPI-486
46 3/8"
CSPI-4212
40 3/8"
CSPI-4812
46 3/8"
CSPI-5412
52 3/8"
CSPI-6012
60 3/8"
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
Installer: Please leave installation instructions with the range hood liner.
Owner: Please keep installation instructions for local electrical inspector's use and for future reference.
WARNINGS: Must be followed carefully to avoid personal injury.
IMPORTANT: Must be followed carefully to avoid damage or incorrect installation.
TIPS: Contains helpful information to facilitate installation.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
PERSONS OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact the
manufacturer at the address or telephone number listed in the warranty.
b) Before servicing or cleaning unit, switch power off at service panel, lock service panel, and lock the service
disconnection means to prevent power from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
c) To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
Revised 05/15/20
Type of
CFM
Motor &
Blower
*
Remote
*
Remote
*
Remote
*
Remote
*
Remote
*
Remote
290
Internal
290
Internal
290
Internal
290
Internal
390
Internal
390
Internal
390
Internal
600
Internal
600
Internal
600
Internal
600
Internal
1200
Internal
1200
Internal
1200
Internal
1200
Internal
READ AND SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS &
USE & CARE GUIDE
CopperSmith
Professional Liner Inserts
®
395 CFM Code Compliant
*These models connect to an In-Line, Roof or
wall-Mounted Remote Blower. The blower used
determines the CFM.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for CopperSmith CSPI-30
- Page 1 INSTALLATION INSTRUCTIONS & USE & CARE GUIDE CopperSmith Professional Liner Inserts ® Professional Liner Inserts Type of Model Width Motor & Blower CSPI-30 28 3/8” Remote CSPI-36 34 3/8” Remote CSPI-42 40 3/8” Remote CSPI-48 46 3/8” Remote CSPI-54 52 3/8”...
-
Page 2: Installation Instructions
CAUTION -- For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. WARNING – TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: a) Never leave surface units unattended at high settings. Boil overs cause smoking and greasy spillovers that may ignite. -
Page 3: Planning The Installation
Remote Blowers, it is highly recommended that the blower NOT ® be attached directly to the liner or in a chase immediately above the liner unless a CopperSmith brand duct silencer is installed between the blower and liner and neoprene lined FC Clamps are used. FC Clamps are ®... - Page 4 ” larger than the following outside dimensions. Models Available (by Width) 28 3/8” Sones Control 34 3/8” 40 3/8” 46 3/8” 52 3/8” 58 3/8” Blower In-Line or Remote Variable CSPI-30 CSPI-36 CSPI-42 CSPI-48 CSPI-54 CSPI-60 Mount Blower CSPI-302 CSPI-362 CSPI-422 CSPI-482 3-Speed Internal Motor...
- Page 5 THROUGH FILTER BRACKETS, ELECTRICAL COMPONENTS OR UL LABEL. ® Because the CopperSmith Liner was designed for various hood applications, no mounting holes have been pre- drilled. This allows the liner to be attached in most any area of the canopy that has a wood frame support, e.g., the back, sides or top.
-
Page 6: Energy Saving Tips
(either in-line or roof top). If the ventilator is rated in watts rather than amps, divide the watts ® by 120 and this will give you the amperage rating. The CopperSmith liner is supplied with a 6.0 amp variable speed fan control. -
Page 7: Wiring Diagrams
CAUTION: Do Not connect this wire to a 3-speed blower ® IMPORTANT: CopperSmith does not pay warranty claims for damage to liners or components connected to other brand blowers inconsistent with these Installation Instructions. Always consult the switch manufacturer's installation instructions when substituting control switches. -
Page 8: Warranty
Installation Instructions included with each product. Some features may be slightly different than shown on product literature. ® For more information, please contact your dealer or CopperSmith Phone: 1-888-431-4677 Email: support@worldcoppersmith.com Website: worldcoppersmith.com... -
Page 9: Best Practices
Best Practices Venting Installation Instructions for Range Hoods and Wood Hood Liners (All Models) — — Addendum to Installation Instructions IMPORTANT: Problems caused by improper installations are not covered by the manufacturer’s warranty. IMPORTANT: Undersized and improperly installed duct pipe and/or other ventilation components will cause excessive static pressure (air resistance), that may result in rattling, vibration and air buffeting noises, as well as inadequate ventilation. - Page 10 Duct Pipe and Fitting Sizes (Continued) Duct Runs – Length a. Configure the ventilation duct run to be as short and as direct to the outside as possible. Minimize the number of elbows and transition fittings used. Complex or long runs should be reviewed by a qualified installer.
- Page 11 a. 290 & 390 CFM Models DO NOT USE SCREWS TO ATTACH THE DUCT TO THE DAMPER FRAME AS THE SCREWS MAY BLOCK THE DAMPER BLADE. ALWAYS use aluminum foil metal duct tape on all connections and physically view the damper blade to make certain it is operating correctly. On ventilator installations designed to recirculate the exhaust air back into the kitchen, be sure to remove the aluminum damper blade before attaching the duct to the damper frame.
- Page 12 Hoods with Optional Top or Back Venting Several range hood models provide the option of venting the exhaust air out the top or back side of the range hood. On some models, this is accomplished by redirecting the motor/blower unit to exhaust through the top, back or the recirculation position.
Need help?
Do you have a question about the CSPI-30 and is the answer not in the manual?
Questions and answers