Failure to do so may result to law, there is no responsibility for compensation. in an accident. DVS will not be responsible for it, please understanding. Do not touch the screen when meet a strike strongly. If liquid crystal touches hands, feet or clothes...
Operating Instructions Using the remote control PRECAUTIONS ‧Point the remote control at the remote sensors within 2 meters. Please read all safety and operating instructions ‧It may not be possible to operate the remote control if in this manual carefully, and keep this manual the remote control sensor is exposed to direct sunlight for future reference.
Getting St arted Correct Handling Monitor Function Overview ‧Do not drop the disc while handling. ‧Hold the disc so you will not leave fingerprints on the surface. ‧Do not affix tape, paper, or gummed labels to the disc. ‧Do not write on the disc. INCORRECT CORRECT Disc Cleaning...
Getting St arted When Using the Remote Control Remote Control Function Overview When you use the remote control for the first time, pull the plastic tape before using the remote control. CAUTION ‧Point the remote control at the remote sensors within 2 meters.
Page 7
Getting St arted POWER REPEAT RPT. Switch the monitor power ON/OFF Select the desired repeat mode. (1) DVD Disc: Chapter Title REP. ALL OSD MENU Enter or exit the on-screen display menu system. (2) CD/VCD Disc: Repeat 1 REP. ALL Repeat OFF EJECT DISK Stop playback and eject the disc.
Ba sic Operations Audio Mute Function Turning Power ON/ OFF The power state of the monitor will not be Remote Control memorized when Ignition/ACC is turned off. When Ignition/ACC is turned back on, the monitor returns Press to turn the Mute function ON and OFF. MUTE to OFF.
MMD Operations Turning FM ON / OFF (Option) CAUTION Press to turn on the FM transmitter. ‧ Not all function will operate for every DVD. See the individual MMD’s instructions for While FM is ON, press to select details on the features supported. desired FM frequency.
MMD Operations Video Menu Finding the Beginning of Press to display Video Menu. Chapters Press to select the desired item, and During playback, press to find the beginning of chapters. then press again to confirm a selection. The chapter / track switches each time the button is ‧...
MMD Operations Switching the Audio Tracks Switching the Angle (DVD only) DVDs can have different audio tracks. These alternate On DVDs in which scenes have been filmed from tracks can be switched during playback. multiple angles, the angles can be switched during playback.
MMD Operations Displaying the Disc Status Slow Motion Playback Use the procedure described below to display the Slow allows you to select different slow playback modes status (title number, chapter number, etc.) of the for a VCD / DVD during playback. currently playing DVD/VCD/CD on the monitor Press SLOW to select slow playback speed...
USB Operations CAUTION ‧Not all function will operate for every formats. See the individual USB’s instructions for details on the features supported. ‧Do not use USB while driving your vehicle. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in serious injury or an accident.
Monitor Se tup Adjusting Picture Adjusting the Bright The video menu on DVD mode will be different with Press button on the remote control. AV2, AV3 and AV4 mode. The picture setting menu is highlighted. ‧ Each source is independently adjustable. Press to select BRIGHT, then press ‧Make adjustments within 10 seconds, otherwise the...
Monitor Se tup Adjusting the Color Density Setting Audio Mute ON/ OFF (AV2/AV3 only) Press button on the remote control. The picture setting menu is highlighted. Press button on the remote control. The picture setting menu is highlighted. Press to select MUTE, then press to confirm a selection.
Monitor Se tup Setting Language Setting Mirror ON/ OFF Press button on the remote control. The Press button on the remote control. The picture setting menu is highlighted. picture setting menu is highlighted. Press to select LANGUAGE, then press Press to select MIRROR, then press to confirm a selection.
MMD Se tup ■ Setting the System (default : Auto) DVD Setup Operation Broadcast TV System can be manually switched. Press to select NTSC /PAL 60/ The following steps 1 to 2 are common to each of PAL / AUTO. the DVD settings described here.
MMD Se tup Setting Password ■ Language Setup There is not original password. OSD Language, Audio Language, Subtitle Language Press + Number key pad to setup and Menu Language are adjustable. password. ‧The Factory setting of the OSD language is ENGLISH. Press to save adjustment.
MMD Se tup ■ Setting Subtitle Language (default : Chinese) Audio Setup Press to select desired language. Down Mix, Dynamic Range and Down Sample are adjustable. ‧There are 7 kinds of languages can be chosen. SETUP Press button on the remote control. The (Chinese, English, Japan, French, Spanish, Portuguese, German.) setup menu appears on the monitor.
<Option> Wireless headphone Using wireless headphone Headphone Receivers ‧If ACC or the monitor power source is turned off, a 1.Infrared Sensors loud noise is produced through the headphones. (Receive signal from the transmitter.) Be sure to remove the wireless headphones from your ears before you turn the monitor off.
<Option> Wireless headphone Operation Read carefully to prevent causing damage to the headphone or your ears. CAUTION : Before turning on the headphones, please turn the volume down as low as possible. Turn on the power of the screen. Be sure the batteries are properly installed in the headphones.
Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Do not splice into electrical cables. ● This Stanchion Mount is suitable for DVS Seat Back Monitor only. Never cut away cable insulation to supply power to ●...
Installation and Connections Parts Indication 1. LCD Monitor 2. Slide Rail 3. Slide Block 4. Knob 5. Slide Block Linkage 6. Stanchion Washer 7. Screw Limitation Before installation, please make sure that the shape of headrest is available for installation. ●...
Installation and Connections Installation Setp Remove the headrest Install the connecting rod Remove the headrest from the seat. (Figure 1) Let the headrest stanchion pass though the slide block linknge. (Figure 3) Headrest Headrest stanchion Headrest stanchion Slide block linkage Buckle (Figure 1) (Figure 3)
Page 25
Installation and Connections Install and fix the monitor Slide the monitor into slide rail. Then adjust the Without Seatback Cover monitor to the best position and tighten the konb. 1) Stick the marked with sticker on the position you (Figure 5) would like to cut.
Page 26
Installation and Connections Install the headrest Put the headrest back to the seat. (Figure 7) Monitor Headrest stanchion Buckle (Figure 7) Connect th power cable Connect the power cable to the monitor. (Figure 8) Headrest Headrest stanchion Sliding block linkage Buckle Power Cable (Figure 8)
Installation and Connections Connections Power Connector Black Power Cable AV Connectors Yellow Video Input Connector This connector is used in combination with the video inputs of other video products (AV head out or TV Tuner). White(L) Audio Input Connectors These connectors are used in combination with a head unit or TV Tuner Red ( R) with audio output connectors.
Installation and Connections System Connections Multi Media Station TV Tuner AV Input AV Output Remote In AV Output Power Filter Body ( )GND (Black) (Black) (Black) AV Input (Red) Remoten Out (Blue) (Red) (+)ACC (Red) (Yellow) (Yellow) Antenna (Green) AV 3 (Figure 1) 10.2 inch Seat Back Monitor AV Input...
- 2mm depth x2 Power cable Signal cable AV3 Cable Remote control User manual Marked with sticker Base of cover Cover, wire hole Digita l Video System Rear-Seat Entertainment USER MANUAL TH102MS Armrest Mo nito r With MMD & USB Rear-Seat Entertainment...
Information General Specifications DISPLAY SCREEN Model TH102MS Size 10.2 inch Aspect Ratio 16:9 Type Transparent type TN Liquid Crystal Display System TFT-LCD, Active Matrix Number of Elements 800(W)x480(H)x3 1.152M pixels (WVGA) Back Light Brightness 400cd/m Loader System Quanta KDR-081 Auto Dimmer...
Information CD-R/CD-RW playback is not possible. Troubleshooting Close session (finalization) has not been performed. - Perform finalization and attempt playback again. CAUTION Error displays If you encounter a problem, please turn the power Mechanical error off, then on again. If the unit is still no functioning normally, please review the items in the following - Press EJECT.
Information Image stops sometimes. Warranty Disc is scratched. - Replace with an non-scratched disc. CAUTION : Picture is unclear or noisy. ‧ Please make sure to read the user manual carefully. Disc is being fast-forwarded or fast-reversed. ‧ Please make sure to ask for the authentication - The picture may be unclear, but this is normal.
If it’s incorrectly or there is not authentication seal, we will not guarantee your right. Warranty period Item 10.2 INCH SEAT BACK MONITOR Model TH102MS ONE YEAR. Color Black Gray Beige (From the date of original...
Need help?
Do you have a question about the TH102MS and is the answer not in the manual?
Questions and answers