NDI PLUS PL 107-A1 Assembly Instructions

1
Metal Scallop
Shape Handle
2 Sets
6 7
6 Hole
L-Bracket
2 Pcs

IMPORTANT !!

IMPORTANT !!
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched. being scratched.
Check that you have all parts and hardware. Check that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble. Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten any screws or bolts until the unit is completely assembled. Do not tighten any screws or bolts until the unit is completely assembled.
Keep all hardware parts out of reach of children. Keep all hardware parts out of reach of children.
Please follow these instructions for easy assembly.
2 3
File Clip
2 Pcs
8
Screw
5
#6 x "
8
12 Pcs
4
302 x 16 x 3mm
Aluminum Bar
1 Pc
9
1
#8 x 1 "
2
Pan Head Screw
2 Pcs
PL 107-A1
BOX / FILE PEDESTAL
5
JCBC Screw
M4 x 65
M6 x 40mm = 4pcs
Allen-Key
1
1 Pc Washer = 8pcs
4
10
Keys
Pencil Tray
1 Set
PAGE 1 OF 2
1 no.