Operation; Cleaning And Maintenance - Kalorik HUVI VCS 51019 BK Instructions Manual

OPERATION

1. Remove the original dustbin from HUVI and install the new dustbin that is
included and compatible with the self-cleaning station.
2. Open the top of the self-cleaning station.
3. Install the dust bags by inserting the tag attached to the dust bag into
the slot inside the self-cleaning station and close the lid.
4. Plug in the self-cleaning station into a wall outlet. Make sure the original
HUVI charging base is unplugged to avoid confusion when HUVI is
ready to return to the base.
5. Allow HUVI to run like normal. When it is ready to return to the charging
base or instructed to return, HUVI will make its way to the self-cleaning
station to charge and deposit the contents in the dustbin.
NOTE: The dust bags should be replaced when full, approximately after 2
months of regular use.

CLEANING AND MAINTENANCE

1. Press the button of the air outlet cover to take out the air outlet cover
and HEPA filter.
2. Install the air outlet cover and the HEPA in the reverse direction
according to the removal method.
www.KALORIK.com
Air outlet cover
7
HEPA Filter
220131