NIX Labs FL4 Quick Start Manual

Hide thumbs Also See for FL4:

Download this manual

Thanks for your NIX labs purchase! For the full user's guide, visit

This product is not a toy and should be handled with care. Do no insert objects

into the gaps in the enclosure. Do not press on the LED filaments as they are

not flexible. Consult the full manual for complete usage instructions.

Getting Started

Check the box for the following items and remove them from their packaging:

•

FL4 filament clock

•

Australian power adaptor (or Multi-Region adaptor for international orders)

For use in countries other than Australia, remove the AU plug from the power adaptor,

and replace with the correct one for your region (US, EU or UK).

Plug the power adaptor's USB-C end into the socket on the back of your clock either way

around. Connect the power adaptor to the wall outlet and turn on - your clock will show

88:88 for a few seconds after which it is ready to use.

When powering from a computer, connect directly to the computer's USB port – avoid

USB hubs or extension cables. You can use any good-quality charge & data USB-C to

regular USB-A or USB-C to USB-C cable to connect your clock to your computer or

phone/tablet.

FL4 Quick Start Guide

Revision A0

nixlabs.com.au/support.

Page 1 FL4 Quick Start Guide Revision A0 Thanks for your NIX labs purchase! For the full user’s guide, visit nixlabs.com.au/support. This product is not a toy and should be handled with care. Do no insert objects into the gaps in the enclosure. Do not press on the LED filaments as they are not flexible.
Page 2 Using the Online Web App Connect your clock to your PC, Mac, Linux, ChromeOS, or Android device using any good- quality cable. Use Google Chrome, Microsoft Edge or Opera browser to go to app.nixie.com.au, where the complete range of your device’s settings can be easily changed for maximum customisation.
Page 3 Using the Buttons The buttons are labelled with SET, ▼ (down), and ▲ (up). When your clock is showing the time, you can briefly press ▲ to show the date and then the temperature. Also on the time screen, briefly pressing ▼ will cycle through the LED backlighting colours. If in a settings mode and no button has been pressed for 30 seconds, the display will revert back to the normal time screen without saving.
Page 4 Cycle through backlighting colours by holding ▲ or ▼ and release on the desired colour. To Set custom LED show the custom colour on the normal time screen, exit the menu and use ▼ to cycle backlighting colour through presets until new colour is selected. No number is shown on right side of display.