Related Manuals for LevelOne FVT-5000
Summary of Contents for LevelOne FVT-5000
- Page 1 FVT-5000 16-Slot Managed Converter Chassis w/ Redundant Power Supply User Manual Ver 1.00 - 0701...
-
Page 2: Table Of Contents
VENT 5.7......................35 ETTINGS 5.8......................38 AVE AND EBOOT 5.9........................39 PGRADE 5.10..........................39 SNMP MANAGEMENT ...................... 40 SPECIFICATION ........................ 41 OPTIONAL MODULE......................42 8.1. (TS-1000) FVT-5000 O ..............42 ODULE 8.2. (TS-1000) ....................42 ONVERTER... -
Page 3: Introduction
Introduction The FVT-5000 16 Slots Managed Converter Chassis is a combination of 16-slot host cabinet and optional several of media converter bracket modules. A maximum 16-bracket module can be installed in the cabinet with two redundant power supplies. The Power supply supports AC input type with load sharing redundant feature. -
Page 4: Software Feature
1.2. Software Feature Telnet Management Console (RS-232) Web/Telnet Can be enabled or disabled RFC 1213 MIB II MIBS Private MIB Link down Link up Power module status change SNMP Trap Authorization Fail Module plug in and plug out Chassis configuration change Module configuration change Software Upgrade Firmware upgrade by Web interface and TFTP... -
Page 5: Management Methods
1.3. Management Methods The FVT-5000 Managed Converter Chassis supports following management methods: 1.3.1. Console and Telnet Console Management is done through the RS-232 Console Port that requires a direct connection between PC and the Device. The Telnet management is through the network. Once the Device is on the network, you can use Telnet program to Log in and modify the configuration. -
Page 6: Package Contents
1.4. Package Contents Unpack the carton of the 16 Slots Managed Converter Chassis and verify them against the checklist below: FVT-5000 Power Cord Console cable Rack-mount Kit Four Rubber Pads User Manual FVT-5000 Power Cord Console cable Rack-mount Kit Rubber Pads... -
Page 7: Hardware Description
Hardware Description The 16 Slots Managed Converter Chassis is a modular unit that contains 16 slots and 2 power slots. All optional models come with the built-in CPU, and the RS-232 port is used for Out-of-Band Management and one Ethernet RJ-45 connector is for In-band management that both in front panel. -
Page 8: Led Indicators
2.3. LED Indicators All LED status indicators are located on the front panel of the modules. They display real-time indication of system and operational status. CPU Panel LED Description Status Meaning CPU Ready Blink (Green) System kernel is working correctly Green Power on Green... -
Page 9: Connecting To The Network
Connecting to the Network This chapter provides the installation procedure. 3.1. Pre-Installation Requirements Before to start hardware installation, make sure the installation environment has following items: PCs with 10/100Base-TX Ethernet cards: The PC must have a standard Ethernet interface to connect with the Device. -
Page 10: Mounting The Device
3.2. Mounting the Device The 16 Slots Managed Converter Chassis is suitable for an office environment where it can be rack-mounted in standard EIA 19-inch racks or standalone. 3.2.1. Desktop Installation Set the device on a sufficiently large flat space with a power outlet nearby. And, the surface where user put the device should be clean, smooth, level, and sturdy.
Need help?
Do you have a question about the FVT-5000 and is the answer not in the manual?
Questions and answers