Toro 110-2025 Installation Instructions page 2

Note: There are different ends on the left and
right metal baffle stiffeners. See Figure 1 to
identify the difference between the left and right
metal stiffeners.
1. Install the left side rubber baffle and the left
metal baffle stiffener with 4 bolts (5/16 x 1
inch) and 4 locknuts (5/16 inch) (Figure 1).
2. Install the right side rubber baffle and the right
metal baffle stiffener with 4 bolts (5/16 x 1
inch) and 4 locknuts (5/16 inch) (Figure 1).
3. Rotate the cutting blades and make sure they
do not hit the baffles.
Figure 1
1. Mower deck
2. Locknut (5/16 inch)
3. Left side rubber bafe
4. Right metal bafe stiffener
5. Carriage bolt (5/16 x 1
inch)
6. Right side rubber bafe
7. Left metal bafe stiffener
8. Note the different ends on
bafes
2