Table of Contents
Advertisement
Cutting, connecting and mounting
Connecting LEDFlex S cable connector IP65
Choose the desired length and cut the
strip with scissors. After cutting the silver
solder pads should be part of the LEDFlex
S without damaging the solder pads.
Cut silicone sleeve so that the
pads become accessible.
Take care not to damaging the
LED or PCB.
Cable connectors used at sharp corners
9 - 25
Design-in Guide - LEDFlex S system
Align polarity when connecting strips
For curing time glue see instruction
manual glue supplier.
November 2021
Advertisement
Table of Contents
