Advertisement
Quick Links
LEDLFL/LEDXLFL
WARNING
PLEASE READ ALL INSTRUCTIONS
BEFORE ATTEMPTING INSTALLATION
To prevent personal injury or product damage only licensed electricians should install.
To avoid electric shock or component damage disconnect power before attempting installation
or servicing.
This product must be installed in accordance with the national electric code (NEC) and all
applicable federal, state and local electric codes and safety standards.
Disconnect product and allow cooling prior to servicing.
Any alteration or modification of this product is expressly forbidden as it may cause serious
personal injury, death, property damage and/or product malfunction.
To prevent product malfunction and/or electrical shock this product must be properly grounded.
This luminaire is designed to operate in ambient temperatures ranging from -40°c to 45°c.
LIMIT RANGE OF ADJUSTMENT TO.
This product must be installed in accordance with the applicable installation code by a Person
familiar with the construction and operation of the product and the hazards involved.
In 75°c supply conductors.
This product is not available for several special environments, such as places with corrosive gas
liquids or high pressure water vapor
TOOLS REQUIRED
Tools:
1. Sharp Side Cutter
2. Electric Drill
3. Level
4. Measuring Tool
5. Wire Stripper / Knife
6. Philips Screwdrivers
7. Wire Cutters
10835 S Wilcrest Dr, Ste C Houston TX 77099 Customer Service : 833-875-4766 Email : Sales@lironlighting.com
Due to continuous product improvements, specifications and dimensions are subject to change without notice. Certain options have limited compatibility with some other product selections. Consult www.lironlighting.com for most current technical information.
E
Email: Sales@lironli
Email: Sales@lironlighting.com
SHOCK HAZARD!
To avoid electric shock or component damage
disconnect power before attempting
installation or servicing.
WIRING
CORD/ SUOOLY WIRING
Black
White
Green/Yellow Green
Purple
Gray
I
LUMINAIRE
Line
Neutral
Ground
DIM+
DIM-
I
PAGE 1 of 2
Advertisement
Summary of Contents for LiRON LiGHTING LEDLFL
- Page 1 LEDLFL/LEDXLFL WARNING SHOCK HAZARD! PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION To prevent personal injury or product damage only licensed electricians should install. To avoid electric shock or component damage To avoid electric shock or component damage disconnect power before attempting installation disconnect power before attempting or servicing.
- Page 2 Slipfitter Mounting 1. Connect the wires to L / N / GND. 2. Remove the cover and adjust the bracket to the desired angle. 3. Install the bracket on the pole and fix it with screws. Trunnion Mounting 1. Mount fixture to surface using the hole pattern provided on the trunnion bracket. 2.