Advertisement
Table of Contents
VIKING
QUICK START GUIDE
K
See Product Manual for complete installation and programming instructions.
1.0 Out-of-Box
1.1 Verify that you have received all of the parts listed
X 1
1.2 Download the product manual
Scan the QR code to
open and download
the product manual
1.3 Download and install the programming software
1. Go to www.vikingelectronics.com and enter PSA-IP in the search box
2. Click PSA-IP in the search results
3. Scroll down the page to Downloads, click IP Programming Software
4. Install the programming software by saving or opening the file and then clicking on
setup Viking IP Programming.exe
5. Follow the prompts on your screen to complete software installation
2.0 Power Source
Select PoE Switch or PoE Injector that meets the following requirements:
1. IEEE 802.3af / 802.3at / 802.3bt compliant
2. Capable of providing at least 13 Watts (class 0 or class 3)
Note: CAT5e (or higher) cable recommended
3.0 Network Port Settings
• Make sure the port is not in trunk mode
• Make sure port is capable of 100mbps full-duplex
• If Spanning Tree Protocol (STP) is enabled, enable Portfast and BDPU Guard Globally
Electronics, Inc.
PSA-IP IP Paging Speaker
Adapter
- OR -
PSA-IP
IP Paging Speaker
Adapter
April 29, 2021
X 2
X 2
1. Go to www.vikingelectronics.com and
enter PSA-IP in the search box
2. Click PSA-IP in the search results
3. Click Product Manual to open and
download the PDF
#8-18 X 1/4" Pan Head Phillips
Sheet Metal Screw
3 Wire Lever Connectors
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Viking Electronics PSA-IP
Summary of Contents for Viking Electronics PSA-IP
- Page 1 3. Click Product Manual to open and download the PDF 1.3 Download and install the programming software 1. Go to www.vikingelectronics.com and enter PSA-IP in the search box 2. Click PSA-IP in the search results 3. Scroll down the page to Downloads, click IP Programming Software 4.
- Page 2 Questions? Call Viking Product Support: 715-386-8666 Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.
Need help?
Do you have a question about the PSA-IP and is the answer not in the manual?
Questions and answers