Advertisement
Operation Manual
Plate Heat Exchanger
50671–50673, 50675–50687
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Table of Contents
Summary of Contents for XPOtool 50671
- Page 1 Operation Manual Plate Heat Exchanger 50671–50673, 50675–50687 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 50671–50673, 50675–50687 Page 2 The Tool Experts 08 2022-1...
- Page 3 Due to said highly turbu- lent flow-through even at low speed, a self-cleaning process is caused which essentially reduces the danger of calcification and contamination. https://www.XPOtool.com Item 50671–50673, 50675–50687 Page 3 The Tool Experts 08 2022-1...
- Page 4 Heat exchangers are connected in reverse flow. The system needs to be rinsed before installing the heat exchanger. ATTENTION: Pipelines should be routed the way that movements inside the pipes or improper forces to not act on the plate heat exchanger! https://www.XPOtool.com Item 50671–50673, 50675–50687 Page 4 The Tool Experts 08 2022-1...
- Page 5 When starting the system, it is the secondary side first to be opened and then the secondary one. By this means, overheating of the heat exchanger is excluded. https://www.XPOtool.com Item 50671–50673, 50675–50687 Page 5 The Tool Experts...
- Page 6 Distance (㎜) Size (㎜) 315×73 286×116 Number Temperature range (℃) -195–+225 Capacity (ℓ) Operational pressure (㍴) Max. flow rate ( ℓ ⁄ ab. 67 ab. 200 Max. power (kW) https://www.XPOtool.com Item 50671–50673, 50675–50687 Page 6 The Tool Experts 08 2022-1...
- Page 7 Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 50671–50673, 50675–50687 Page 7 The Tool Experts 08 2022-1...
Need help?
Do you have a question about the 50671 and is the answer not in the manual?
Questions and answers