Advertisement
Quick Links
TEMPORARY
GATE FRAME
AND FENCING
INSTALLATION GUIDE
IDEAL FOR
TEMPORARY
POOLS
Tools Required: Drill, Tape Measure, Mallet
STEP 1 – ASSEMBLE GATE FRAME
If fitting a temporary gate frame kit, fit this before installing the
temporary fence panels, its easier to start from the gate and work
outwards to ensure the gate opening is correct.
1
1. Lay flat and slide parts together as shown
2. Fix off with supplied screws
3. Position frame as required on site and hold in place with supplied
steel pegs placed through the base plate and into the ground. Fix
firmly using 2100mm long star pickets (purchased seperately) placed
through the baseplate cutout and hammer into ground until stable.
Ensure the pickets are vertical.
Frame is now ready to install a Protector Pool Gate.
We recommend
and latch, follow installation guide
with products to ensure pool safety
compliance.
USE DURING
CONSTRUCTION
2
hinges
3
Advertisement
Summary of Contents for MAKE IT: EASY Protector Al
- Page 1 TEMPORARY GATE FRAME AND FENCING INSTALLATION GUIDE USE DURING CONSTRUCTION IDEAL FOR TEMPORARY POOLS Tools Required: Drill, Tape Measure, Mallet STEP 1 – ASSEMBLE GATE FRAME If fitting a temporary gate frame kit, fit this before installing the temporary fence panels, its easier to start from the gate and work outwards to ensure the gate opening is correct.
- Page 2 STEP 2 – ASSEMBLE FENCE PANELS Insert fixing brackets into pool fence panels (panels sold seperately) as shown and fix off with screws. 1. Fit fence panels either side of gate by sliding panels over pickets 2. Once fence panels are in position, secure cable ties through holes in star pickets and around the temporary frame, this will stabilise the frame.