Mercedes-Benz EQS 350 Operator's Manual page 516

Table of Contents

Advertisement

Display messages
Change steering wheel/
seat position until 6 dots
are visible on the upper
edge of the screen
Driver camera inoperative
See Owner's Manual
ä
Fault Drive at max. 80
km/h
Possible causes/consequences and
* The driver camera cannot capture your line of sight.
Change the steering wheel and seat position until six dots are visible on the top edge of the screen.
#
The display message will appear again if the driver camera is again unable to detect your line of sight after
30 minutes.
The display message will no longer appear if you confirm the display message and the driver camera cannot detect
your line of sight during the entire journey.
* The driver camera is malfunctioning.
Consult a qualified specialist workshop.
#
* AIRMATIC is functioning only to a limited extent. The vehicle's handling characteristics may be affected.
* NOTE The tyres on the front axle or the fenders could be damaged by large steering movements
Avoid large steering movements while driving and listen for scraping sounds.
#
If you hear scraping sounds, pull over and stop the vehicle in accordance with the traffic conditions, and set a
#
higher vehicle level if possible.
Drive in a manner appropriate for the current level, but do not exceed 80 km/h.
#
Consult a qualified specialist workshop.
#
Solutions
M
Display messages and warning/indicator lamps 513

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eqs 450 4maticEqs 500 4maticEqs 450+Eqs 580 4matic

Table of Contents