Advertisement
Quick Links
Installation guide
- Raptor 47HLB 80, 170
Please read through before installation. Please read safety guidelines leaflet.
What's in the box? Getting to know the Raptor
6
7
2
1
5
4
3
6
8
13
14
12
15
9
Key
10
1. LED fence monitor
2. on/off switch
3. Ground connection terminal
4. Fence connection terminal
11
5. Power input jack
6. Mounting holes
7. Carry handle
8. 6v battery compartment
9. Stand
10. Mounting studs
11. Fixing thumb screw for stand
12. 12v input lead for battery operation
13. Ground connection lead
14. Fence connection lead
15. Power adaptor for mains operation
Advertisement
Related Manuals for Raptor 47HLB 80
Summary of Contents for Raptor 47HLB 80
- Page 1 Installation guide - Raptor 47HLB 80, 170 Please read through before installation. Please read safety guidelines leaflet. What’s in the box? Getting to know the Raptor 1. LED fence monitor 2. on/off switch 3. Ground connection terminal 4. Fence connection terminal 5.
- Page 2 A 6v spring top battery can also be used alongside both 12v and 230v modes to provide a back up power source or, in the case of the Raptor 20 and Raptor 80, an alternative pri- mary power source.*...
- Page 3 Switching on and off Rotating Fence monitor Indicates voltage conditions on your fence. Good effective attention Battery indicator The central LED will flash when your 12v battery is low and when the raptor is operating from the internal 6v battery.
- Page 4 This is a good indication that the energiser working. The indicator light or fence monitor should be pulsing or flashing. As the raptor has an in built fence monitor and this should be operating at all times. If the display is red it is indicating that the energiser is under heavy load from the fence system.