Table of Contents
Advertisement
5. System function
5.1 PERFORMING CALLS
5.1.1 How to call from the external unit
„ To send the call from an external unit, press the button.
» On the external unit the LED will flash and the confirmation
tone will sound. The video image from the external unit will
appear automatically on internal monitor/s.
5.2 PAGING CALL
5.2.1 How to initiate a paging call
„ Press
to initiate the all-page chime
» After the chime sounds, a 30 seconds message can be
broadcast to all door entry monitors on the system (maxi-
mum 4).
1
A call from the external unit always takes priority over an intercom communication or a paging call
» the call in progress will be terminated for the other devices.
„ Press the desired key once to activate the function associated with it.
Wait for approximately 1 sec. before pressing the same key again.
1
5.1.2 How to answer a call from an internal unit
» On receipt of a call from the external unit you will hear the
call ringtone
„ Press
to enter into communication with the caller
„ Press
again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
2
5.2.2 How to answer a paging call
„ Press
to answer the paging call
» a (300 seconds) point to point conversation between the
two door entry monitors is established.
» the paging call will be terminated for the other devices.
2
15
Advertisement
Table of Contents
