Table of Contents
Advertisement
Quick Links
OPERATING
MANUEL
Information in this manual is reviewed and completely reliable. Responsibility is not assumed due to any typing error.
Products in this manual are available only for information purpose and they may be changed without notice.
Models :
WATERSENS
WATERSENS-K
WATERSENS-P / N / R
Important Notes:
Used Symbols :
: Caution
Please read this manual carefully before installation of the liquid warning dedector. User is responsible for accidents and losses arising
from failure to comply with the warnings in this manual.
In the event that liquid warning dedector is broken, take measures in order to prevent accidents and losses which can occur in its system.
There is not any fuse and circuit breaker on the instrument; they should have been added to the system by the user.
This manual should be stored in an easily accessible place for subsequent use.
The manufacturer's liability cannot exceed the purchase price of the device according to the law.
Do not make any modification on the instrument and do not try to repair it. Reparation should be made by authorized service staff.
Do not operate the system before making assembly in compliance with the assembly chart related to the instrument.
Products which do not contain label and serial number are considered to be excluded from the warranty scope.
The instrument's useful life, determined and announced by the ministry, is 10 years.
Table of Contents :
1.
General Information...........................................................................................................................................................................2
2.
Installation .........................................................................................................................................................................................6
3.
Failure Detection..............................................................................................................................................................................8
4.
Disassembly of Instrument ............................................................................................................................................................8
5.
Service .............................................................................................................................................................................................8
6.
Recalibration....................................................................................................................................................................................8
7.
Repair................................................................................................................................................................................................8
8.
Disposal ...........................................................................................................................................................................................8
9.
Terms of Warranty ..........................................................................................................................................................................8
10.
Terms of Return …………………………………………………………………………………………................................................…8
WATERSENS
Model :
LIQUID WARNING DEDECTOR
: Note
: Disposal
1
Model : 29-2022-005
Advertisement
Table of Contents
Related Manuals for ENSIM SENSORS WATERSENS
Summary of Contents for ENSIM SENSORS WATERSENS
-
Page 1: Table Of Contents
Information in this manual is reviewed and completely reliable. Responsibility is not assumed due to any typing error. Products in this manual are available only for information purpose and they may be changed without notice. Models : WATERSENS WATERSENS-K WATERSENS-P / N / R Important Notes: Used Symbols : : Caution : Note : Disposal Please read this manual carefully before installation of the liquid warning dedector. -
Page 2: General Information
1.2. Information about Areas of Use WATERSENS is used in order to detect the flood in advance and to take precaution at homes and offices. It can be powered by 9V. battery. It can be ensured to stop any water leakage by commanding relay output to a solenoid valve. It can avail people around it to take precautions by attracting their attention through siren. - Page 3 2 A / 125 VAC NO / NC Output 2 years for storage Battery life ABS Plastic, Black Colour (Opt.Grey) Housing (Inbox; 1 ea. watersens and probe Probe 1 ea. Battery, 1 ea. Double-sided tape Probe 2 ea. Wall mounting bracket) 190 g.
- Page 4 Technicial Specifications : WATERSENS-P / N / R Supply 18 - 29 VDC Cable 3 x 022 mm² or 5 x 022 mm² , 2 m. Std. Output PNP-NO or NC Max. 100 mA NPN-NO or NC Max. 100 mA RELAY-NO / NC Max.
- Page 5 2 A / 125 VAC NA / NK Battery Life 2 years for storage Housing ABS Plastic, Black Colour (Opt.Grey) (Inbox; 1 ea watersens and probe 1 ea. Battery, 1 ea. Double-sided tape 2 ea. Wallmounting bracket) Connection 3/4 ” NPT Double Sided Body Material Polypropylene Opt.
-
Page 6: Installation
-Due to the fact that device does not consume any energy other other than alarm position, you do not need to replace the battery. Battery waiting life is 2 years according to production date. Yap k an Watersens Watersens Röle Ç k... - Page 7 Without Supply P Type Probe........5 Special ................x CABLE LENGTH ..............mm OPTIONAL None............../ 0 Special ................x EXAMPLE WATERSENS - 0 - 304 -00 - 10 - 0 - 00 - 3 / 0 WATERSENS , Relay NO / NC , Grey Boxed...
- Page 8 2.5. WARNINGS!!! Please pay attention to following matters in order to operate your level switch properly. Do not pull the cable strongly, It should not be placed In case vapour splash cable otherwise the characteristics potting points,insulation on metal conductive surfaces. might be changed.
-
Page 9: Failure Detection
3. Failure Detection Breakdown Probable Failure detection/correction -Notify the authorized service. No relay output -The whole device is stuck in the water. / Continous relay output -A high current was applied to the contacts of the device. -The battery may be low, please check it. -The probe cable was torn off while replacing the battery.
Need help?
Do you have a question about the WATERSENS and is the answer not in the manual?
Questions and answers