Redline xDSL RL-WR2400 User Manual page 15

Redline xDSL Hardware Installation
1
1 Wi‑Fi Antenna
Your device has two PCB Wi-Fi antennas
with 5 dBi gain. It is recommended that the
antennas stand in a vertical position.
2 "0" Dsl Port
Port where you can connect DSL line with DSL
splitter included in the box.
3 «1», «2», «3», «4»Port of Numbers
Ports for connecting computers and other
network devices. The indicator on the port
lights up when the connection is established,
and blinks continuously during data
transmission.
1 2 3
2 3
To reset the administrator password and user
settings in all modes, press and hold this button
for 10 seconds until the status indicator starts
flashing. In main operating mode, your device will
reboot with default settings.
5
comes with the Redline device. Your
device is designed for continuous
operation and does not need to be turned
off daily.
6
of your device on or off.
may damage your device.
4
4 5
4 Reset Button
Power Input
It is the DC power adapter input that
On/Off Switch
Please use this button to turn the power
Disconnecting the direct power cable
6