Description of LED Indicators o Smart LED (Green) o GPS LED (Amber) o GSM (Red) New SIM card installation instruction - o Preparation o Insertion of SIM card 2. Do’s and Don’ts - User & Installation Manual: CLAAS Trackmaster device Ver-6.1.4(DATE- 23/10/2015)
On receipt of VTS Device please check that all the parts are as describe below: Product Part list for VTS DEVICE VTS DEVICE (CLAAS Trackmaster) with Device ID sticker Grommet inserted on cable (Qty.1) Assembled 6 PIN 250 SRS Tab housing M6 Nut (Qty.2) and Washers (Qty.2)
Securely insert 6 PIN connector through the cut out and close the cut out with the grommet available on the cable. Connect the VTS device connector with the 6 PIN recept housing available for device in machine wiring harness. User & Installation Manual: CLAAS Trackmaster device Ver-6.1.4(DATE- 23/10/2015)
Now insert new SIM card and lock the slot by pressing the slot in lock direction. — Close the VTS device securely without damaging the seal used for water proofing of the device and tighten the 8 screws using screw driver. User & Installation Manual: CLAAS Trackmaster device Ver-6.1.4(DATE- 23/10/2015)
Do not use VTS device for any other purpose except for the machine Tracking/Management. NOTE: - Removing or tempering the warranty sticker will void the warranty. For any kind of assistance please contact: – 1. 18001026912 ( Toll-free) 2. 0172-5016501 User & Installation Manual: CLAAS Trackmaster device Ver-6.1.4(DATE- 23/10/2015)