Important Safety Instructions Read these instructions . Keep these instructions . Heed all warnings . Follow all instructions . Do not use this product near water . Clean only with a dry cloth . Do not block any ventilation openings . Install in accordance with the manufacturer's instructions . Do not install or place this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat .
8-core (or 12-core) MPO/MTP, OM3 50/125 μm Multi-mode fiber cable . Your complete satisfaction is very important to us . The Gefen GF-HD48G-1MPO is a compact and high-performance solution for extending uncompressed, full-bandwidth HDMI 2 .1 audio/video with HDR (standard 10-bit and Dolby Vision™), up to 100m (330 feet), over a single 8-core (or 12-core) MPO/ MTP, OM3 50/125 μm Multi-mode fiber cable for optimized operation .
Connectors & Indicators DC +5V Power LED Power Jack (RX) Indicator MPO/MTP Connector Connection Instructions Connect the transmitter module to the HDMI source device . Connect the receiver module to the display . Connect the MPO/MTP (Type A) optical cable (8 ch or 12 ch) from transmitter to the receiver . Connect the included +5V DC power supply into the transmitter .
Sample Wiring Diagram Up to 100 M 5V DC Power Transmitter Receiver Display NOTE: The Receiver Module must be connected to the included power supply (5V DC) for proper operation . Connect the power supply to the Transmitter Module if the source doesn't supply enough power .
March 29, 2017 . ** Proof of purchase must be a receipt or written document, deemed acceptable by Nice North America . Requesting an RMA . The RMA number must be obtained prior to returning any product for repair or replacement . Please contact us at support@ gefen .com...