Product Overview Front Back Air Quality Air Outlet (AQ) Display Rotatable USB-C Port Air Quality Air Inlet (AQ) Sensor In The Box Cupholder GERMAGIC Insert HEPA13 Filter Battery Pack USB-C Cable...
Page 3
Product Overview Filter Installation / Removal 1. Turn the filter cap on the bottom of the device counter-clockwise to unlock. 2. Insert or remove the filter inside the device. 3. Align the unlocked icon (o) on the filter cap with the arrow behind the device and rotate the filter cap clockwise to lock.
Getting Started Air Quality (AQ) Display Filter AQ Level Replacement Plasma AQ Light Ions Fan Speed Wired/ Wireless Mode Touch Control AQ Light Colour Air Quality Levels (μg/m Blue Good 0 - 40 Orange Fair 41 - 200 Purple Poor 201 - 500 Very Poor >501...
How to Use Touch Control Hold the touch control for 1 second On/Off to turn the device on and off Tap the touch control once to change Fan Speed between fan speeds (Auto, 1, 2, 3) Double tap the touch control to turn Plasma Ions ions on and off Triple tap the touch control three...
Page 6
How to Use Wireless Mode 1. Align the unlocked icon (o) on the battery pack with the arrow behind the device. 2. Turn the device clockwise to lock the battery pack into place. Battery Charging Connect the USB-C cable to the port located on the back of the device with the battery pack attached.
Page 7
How to Use Airflow Change Turn the rotatable top clockwise 180 to change the angle of airflow. Turn the rotatable top counter-clockwise 180 to revert the angle of airflow back to the original. Note: Do not turn the rotatable top beyond 180 or in the incorrect direction.
Page 8
How to Use Cupholder Insert 1. Place the cupholder insert inside the cupholder and rotate the top clockwise to lock the cupholder insert into place. 2. Align the unlocked icon (o) on the cupholder insert with the arrow behind the device. 3.
Page 9
Precautions • Do not dismantle or modify the device. Doing so will void the warranty. • When in use, please be careful of hair or unknown objects entering the fan. Do not insert objects into the fan. • Do not block the air inlet and air outlet areas. •...
Troubleshooting Issue Possible Cause Solution Unable to • Connect USB-C cable No power turn on to outlet Not charging USB cable type • Use USB-A to USB-C only Long charge • Turn device off while Continuous use time plugged in •...