Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
NOTE TO CUSTOMERS :
•
For ease and speed of assembly we recommend that before you commence each step of the
assembly that you identify all the parts required to complete that step.
•
We recommend that where possible you allow sufficient space to assemble the item as close as
possible to the place where it will be once assembled.
•
For the protection of your furniture we recommend that the product is placed on protected surfaces
during assembly to prevent any damage.
•
During assembly do not over tighten,as this may damage the product.
•
Please ensure you retain all the product packaging until the item completely assembled.
•
Please periodically check all fittings and re-tighten as necessary.
•
Please never allow any liquids to remain on your furniture as absorption can cause the wood to warp
or finish to de-laminate.
•
It is recommended that this item should be assembled by two adults.
Desk
Page 1 of 5
Advertisement
Summary of Contents for KB HO1278
- Page 1 ASSEMBLY INSTRUCTIONS Desk NOTE TO CUSTOMERS : • For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step. • We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled.
- Page 2 Quantity Quantity Quantity Quantity of 1 of 4 of 1 of 1 Drawer Side Panel Drawer Front Panel Top Panel Quantity Quantity Quantity of 1 of 1 of 1 Drawer Side Panel Drawer Back Panel Drawer Bottom Panel Quantity Quantity Quantity Quantity of 8...
- Page 3 STEP 1: Assemble Legs (B) to Top Panel (A) using Bolts with Washers (1). 8pcs 8pcs 8pcs Place desk on the floor and check if it is stable before tightening all bolts. Page 3 of 5...
- Page 4 STEP 2: 1). Assemble Drawer Side Panels (D&E) to Drawer Front Panel (C) using Cam-bolts (2) and Cam-locks (3). 2). Insert Drawer Bottom Panel (G) into the grooves of Drawer Side Panel (D&E) and Drawer Front Panel (C). 3). Assemble Drawer Back Panel (F) to Drawer Side Panels (D&E) using Screws (4). 4).
- Page 5 STEP 3: Insert the drawer into this unit. Page 5 of 5...