Subscribe to Our Youtube Channel
Summary of Contents for Wieland gesis CPO
- Page 1 gesis® CPO Distribution box – Consolidation Points Decentralized Power, Data and Signal Distribution User manual Doc. No. BA001287 Last Update: 06/2022 (Rev. A)
- Page 2 Table of contents INFO This work is copyrighted material. The resulting rights remain with Wieland Electric GmbH. Any du- plication of this document or parts thereof is permitted only within the limits of the statutory provi- sions of the Copyright Act. Alteration or abridgement of this document without the express written consent of Wieland Electric GmbH is prohibited.
-
Page 3: Table Of Contents
Connections pluggable with cable assemblies 8.3.2 Pluggable connections with ready-made connectors 8.3.3 Connectors with non-pluggable input 8.3.4 Fitting the flat cable adapter to the flat cable 8.3.5 Data line 8.3.6 Connecting the earthing point Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) - Page 4 Table of contents Commissioning Operation Maintenance Disassembly 12.1 Disassembly steps 12.2 Storage 12.3 Recommissioning Accessories Disposal Service and support Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A)
-
Page 5: About This Manual
This user manual provides technical staff with information about the configuration, operation and functionality of the gesis® CPO distribution box. You can find further information on our website www.wieland-electric.de or via the QR code. NOTE Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 6: Symbols And Notations
Notes concerning the special functions of the device. NOTE Instructions also advise you of a potentially dangerous situation. If the symbol is not observed, it can lead to damage to the system or the system environment. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 7: Safety
You can find the relevant CE declaration at: https://eshop.wieland-electric.com or via the QR code below. Navigate to the download area of your product. You will then find the CE declaration under the item "EC Declaration of Conformity". Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 8: General Product Information
The product is a pre-wired distribution box for pluggable electrical installation. The distributors are manufactured according to IEC 61439. The Wieland gesis® CPO distribution box is a simple solution for addressing the needs of a flexible, decentralized installation, such as a flexible office. A range of suitable distribution boxes are available for the decentralized distribution of power, signals or data. -
Page 9: Product Designs
Multiple con- nections can be plugged into the single-phase or 3-phase feed, depending on the variant. For more details on using the gesis® CPO, visit https://eshop.wieland-electric.com. 4.1.2 Power distributors with protection/switching devices Distribution boxes for power distribution with internal protection/switching devices are used for de- centralized power distribution and must be operated according to specifications. -
Page 10: Data Distributors
The different variants are distinguished by the number of outputs. For details on using the gesis® CPO, visit https://eshop.wieland-electric.com. Contact the respective manufacturer for technical data relating to the interface elements. Article number 98.530.0102.0... -
Page 11: Distributors For Signal Transmission
250 × 375 × 75 mm 250 × 375 × 45 mm 250 × 375 × 75 mm depth) IP rating* IP20 / IP40 IP20 / IP40 IP20 / IP40 *Mating connector not inserted / inserted Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 12: Application Areas
• Power distribution with decentralized protection • Lighting applications with DALI • Sun protection applications with SMI Figure 2: Decentralized workplace supply with consolidation points Figure 3: Decentralized power supply in the shop Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 13: Specifications
QR code. Navigate to the "Technical Data" area of your product. All the neces- sary information is displayed there. You can also generate and download a product data sheet in PDF format in the "Data sheet" area. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 14: Dimensions
QR code. Navigate to the "Technical Data" area of your product. All the necessary information is displayed under "Dimensions". Dimensional drawings can be down- loaded from the download area. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 15: Mounting
• the distribution box can be accessed at all times for visual inspections. • the distribution box is not exposed to direct sunlight. For information relating to the dimensions and bore hole sizes, read chapter 7 "Dimensions", page 14. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 16: Connecting The Leads
The connections must be wired directly to the installed connec- tion points. Variants with a flat cable adapter are already wired internally and just have to be con- nected to the flat cable. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 17: Fitting The Flat Cable Adapter To The Flat Cable
Connecting the earthing point In order to ground the gesis® CPO distribution box, connect the protective conductor connections to the ground connections on the housing and, if applicable, the cover in accordance with standards. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 18: Commissioning
During installation and commissioning, you must make sure that the necessary EMC directives are complied with. For further details on the mechanical or electrical data, see the enclosed documentation in the scope of delivery or at https://eshop.wieland-electric.com. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 19: Operation
Normally, there is no need to operate the distribution box. If protection/switching devices have tripped or other defects are identified, the relevant qualified electrician must be informed. Do not switch on the devices independently. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 20: Maintenance
• Changes to the distribution box render this manual invalid. The qualified electrician who made the change is responsible for updating or creating a new manual. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 21: Disassembly
Store the distribution box in a dry place protected from mechanical damage until it is commissioned or recommissioned. 12.3 Recommissioning For information on correct recommissioning, please refer to chapter 9 "Commissioning", page 18. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 22: Accessories
Accessories ACCESSORIES For compatible accessories, visit https://eshop.wieland-electric.com or scan the following QR code. Navigate to your product. The "Accessories" area contains a list of compatible accessories. Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) -
Page 23: Disposal
EAK: 16 02 16 If the distribution box is defective, it must be disposed of or sent to Wieland Electric GmbH for re- pair. To initiate the process, contact your responsible contact partner. -
Page 24: Service And Support
Tel. +49 951 9324-0 +49 951 9324-198 E-mail info@wieland-electric.com http://eshop.wieland-electric.com http://www.wieland-electric.com UKCA – for UK: Wieland Electric Ltd | Ash House, Tanshire Park | Shackleford Road | Elstead, Godalming GU8 6LB Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A) - Page 25 Wieland Electric GmbH Brennerstraße 10 – 14 DE-96052 Bamberg Tel +49 951 9324-0 Fax +49 951 9324-198 info@wieland-electric.com www.wieland-electric.com...
Need help?
Do you have a question about the gesis CPO and is the answer not in the manual?
Questions and answers