Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HORNER Shearing Zipper II
Summary of Contents for HORNER Shearing Zipper II
- Page 1 Setting up and maintaining your machine Instruction Manual...
- Page 2 Fitting the comb and cutter __________________________________________ 5 When to change the comb and cutter _______________________________ 6 Lubrication __________________________________________________________ 6 Tension adjustment __________________________________________________ 7 Cleaning the air filter _________________________________________________ 7 Storage _______________________________________________________________ 7 Technical Diagram & Spares List _____________________________________ 8 ZIPPER II INSTRUCTION MANUAL...
- Page 3 Check the machine body and electrical cable for defects before use. Sacrificial gear safety feature This machine incorporates a sacrificial gear which is designed to strip in the event of the machine jamming or encountering an obstruction, e.g. wire in wool, improper comb setup (see page 5) or lack of oiling. ZIPPER II INSTRUCTION MANUAL...
- Page 4 Sharpen combs and cutters on a specialist grinder. • All persons using this machine must be trained in its safe use • Operating instructions should be kept in the storage case and should be accessible at all times. ZIPPER II INSTRUCTION MANUAL...
- Page 5 MOVE THE COMB FORWARD SO THAT THE BASE OF THE CUTTER CANNOT DROP INTO THE OIL GROOVE. THE GAP BETWEEN THE TIP OF THE CUTTER AND THE END OF THE FLAT ON THE MIDDLE TOOTH SHOULD BE AT LEAST 1.5MM. ZIPPER II INSTRUCTION MANUAL...
- Page 6 Points 1 & 3 - oil every 3 minutes Point 2 - oil every 10 minutes The Zipper does not slow down or sound differently when in need of oil, so it must be oiled frequently. ZIPPER II INSTRUCTION MANUAL...
- Page 7 Illustration 2 - Tension Turn clockwise to tighten Cleaning the air filter • Clean the air filter with a dry soft brush frequently. • The machine must never be operated without the air filter element. Storage Store the machine in a clean and dry place, out of the reach of children. ZIPPER II INSTRUCTION MANUAL...
- Page 8 14 15 3 4 5 17 18 27 28 41 42 38 39 34 35 36 37 1 - Zipper Crank Roller - H12-001 24 - Zipper Brush Holder - H12-022 2 - Zipper Crank Spindle - H12-002 25 - Zipper Right Hand Fork - H12-023 3 - Zipper 608Z Bearing - H12-003 26 - Zipper Left Hand Fork - H12-024 4/5 - Zipper Drive Gear - H12-004...
Need help?
Do you have a question about the Zipper II and is the answer not in the manual?
Questions and answers