Advertisement
Access & Power Integration
Trove1HC1R
- Trove rack enclosure with
Altronix and Hartmann Controls Backplane (TM1R)
Installation Guide
All registered trademarks are property of their respective owners.
Rev. 072522
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Hartmann Trove1HC1R
- Page 1 Access & Power Integration Trove1HC1R - Trove rack enclosure with Altronix and Hartmann Controls Backplane (TM1R) Installation Guide All registered trademarks are property of their respective owners. Rev. 072522 Installing Company: _______________ Service Rep. Name: __________________________________ Address: _____________________________________________ Phone #: __________________...
- Page 2 Overview: Altronix Trove1HC1R rack mount access & power integration solution accommodates various combinations of Hartmann boards with or without Altronix power supplies and accessories for access systems. Specifications: Agency Listings: • CE European Conformity. Trove1HC1R Trove1R rack mount enclosure with THC1R Altronix/Hartmann backplane.
- Page 3 7. Make sure that all internal cofigurations (wiring, voltage selection, switch settings, etc.) are complete before mounting backplane back into enclosure. 8. After all components are mounted on the backplane, attach it to the enclosure using included hardware. Trove1HC1R Installation Guide - 3 -...
- Page 4 5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable slide using bolts and lock nuts (included) (Fig. 4, 4a, pg. 4). 6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts (included). Fig. 4 Fig. 4a - 4 - Trove1HC1R Installation Guide...
- Page 5 1. Align the Hartmann Controls boards on the backplane to match the boards’ mounting holes with corresponding pems. 2. Fasten spacers (provided) to pems that match the hole pattern for Hartmann Control boards (Fig. 5, 5a, pg. 5). Note: Hartmann Controls boards must be properly grounded.
- Page 6 Notes: - 6 - Trove1HC1R Installation Guide...
- Page 7 Notes: Trove1HC1R Installation Guide - 7 -...
- Page 8 4.57” 116.1mm 26.5” 673.1mm 19” (482.6mm) 3.375” 85.8mm Hartmann Controls is not responsible for any typographical errors. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 10 Lockhart Rd, Barrie, ON L4N 9G8, Canada | phone: 1-877-411-0101 web site: www.hartmann-controls.com | e-mail: sales@hartmann-controls.com MEMBER IITrove1HC1R G25V - 8 -...
Need help?
Do you have a question about the Trove1HC1R and is the answer not in the manual?
Questions and answers