Advertisement
Quick Links
User manual
Cross LED display screen
Version: V1.1 Release time: 2021.4.19
Statement
Without the written permission of the company, no unit or individual
shall imitate, copy, transcribe or translate part or all of the contents of this
manual without authorization. Do not use this manual in any form or any
Advertisement
Summary of Contents for Onbon BX-Y08
- Page 1 User manual Cross LED display screen Version: V1.1 Release time: 2021.4.19 Statement Without the written permission of the company, no unit or individual shall imitate, copy, transcribe or translate part or all of the contents of this manual without authorization. Do not use this manual in any form or any...
- Page 2 method (electronic, mechanical, photocopying, recording or other possible methods) for commodity dissemination or for any commercial or profit-making purposes. The product specifications and information mentioned in this manual are for reference only, and will not be notified if the content is updated. Unless there is a special agreement, this manual is only used as a guide, and all statements and information in this manual do not constitute any form of guarantee.
- Page 3 About software.........................4 Device connection........................4 Add cross screen........................6 Cross parameter configuration....................7 Contact us..........................9 Introduce Thank you for purchasing our LED control card. I hope you can enjoy the excellent performance of this product. The design of the LED control card complies with international and industry standards, but if it is improperly operated, it may still cause personal injury and property damage.
-
Page 4: About Software
About software Do not modify, decompile, disassemble, decrypt, or reverse engineer the software installed on this product. The above behaviors are illegal. User guidance Device connection First connect the computer and the router, and then connect the Y series control card to the router with a network cable, and connect the control card to the cross screen through a flat cable. - Page 5 Router Cross screen Internet flat cable Internet line Y08control card Add Screen Open the Led show YQ software, select the "parameter settings" menu → "Set Screen Parameters", in the "Screen Parameters Settings" interface, click on the "find" at the bottom right of the interface, as shown in figure 1 below. Then enter the "Add Screen"...
- Page 6 In the pop-up "Add screen" interface, check "Add all screens", and finally click "find" to successfully bind the screen to the controller. Picture 2 Add cross screen Return to the "Screen Parameters Setting" interface, click "Cross Screen", and click "OK" in the pop-up dialog box to complete the addition of cross screen, as shown in the following figure.
- Page 7 Picture 2 Cross parameter configuration After adding the cross screen, the screen name on the right will change to "Cross Screen". Select "Cross Screen Parameter Configuration" and set the width and height of the controller. www.onbonbx.com 第 7 页...
- Page 8 Picture 3 1. In the drop-down list under "Module Size", you can select the commonly used module width and height. If it is not a commonly used module, you can click "Custom" to set the width and height of the module by yourself.
- Page 9 Contact us Shanghai ONBON Technology Co.,ltd (Headquarters) Address: 7 Floor, Tower 88, 1199#, North Qinzhou Road, Xuhui District, Shanghai City, China Tel Phone: 086-21-64955136 Fax: 086-21-64955136 Website: www.onbonbx.com ONBON (Jiangsu) Optoelectronic Industrial Co.,LTD Address: 1299#, Fuchun Jiang Road, Kunshan City, Jiangsu Province, China...
Need help?
Do you have a question about the BX-Y08 and is the answer not in the manual?
Questions and answers
Экран P4 480*320, модули P4 80*40 Qiangli 20 Scan, Подойдет или нет BX-Y08.