Related Manuals for BFG Technologies Grower Select Expanded Metal Bench Top
Summary of Contents for BFG Technologies Grower Select Expanded Metal Bench Top
- Page 1 Expanded Metal Bench Top Assembly Manual bench top only – legs and rolling systems available but sold separately...
- Page 2 Expanded Metal Bench Top Assembly Manual Thank you for your order, this assembly manual was created to provide you the information and required steps needed when assembling your new Grower Select Bench System. Please check the packing slip when the order is received. Separate out all the parts and count them to ensure everything needed is included.
- Page 3 Expanded Metal Bench Top Assembly Manual NOTE: Please read through the instructions completely before starting! WARNING: The hat sections as well as the other steel pieces can have very sharp edges. Take precautions when handling. Wear Gloves! Step 1 of 6 Take the Bench Top Crossbar Supports (Hat Sections) and place them at 2ft on center.
- Page 4 Expanded Metal Bench Top Assembly Manual Step 3 of 6 The end Hat Sections should be positioned half on, half off the aluminum end rail as in the picture to the right. Take the 2 pieces of Aluminum Rail Bench Top End Trim and fit them together with the Side Trim.
- Page 5 Expanded Metal Bench Top Assembly Manual Step 5 of 6 Take the 4 Corner Protectors and attach them to the 4 corners of the Aluminum Rails using a ¾in TEK Screw on each side. Step 6 of 6 ALL DONE. The Bench Top should look like the picture to the right.
Need help?
Do you have a question about the Grower Select Expanded Metal Bench Top and is the answer not in the manual?
Questions and answers