Table of Contents
Advertisement
System pressure (CISE)
Same as Static (Running) Fuel Pressure.
Residual pressure (CISE)
Same as Fuel Pressure Leak Down.
Maintenance
Procedures not specifically explained in this manual must be performed
only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged
equipment. If abnormal noise, vibration, or leaking air occurs, have the problem
corrected before further use.
BEFORE EACH USE, inspect the
1.
general condition of the tool. Check for:
• loose hardware
• cracked, worn, or damaged Adapters
• damaged Pressure Gauge and Hose
• any other condition that may
affect its safe operation.
If a problem occurs, have the problem
corrected before further use.
Do not use damaged equipment.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS
LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE
TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT
HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO
THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Item 58817
For technical questions, please call 1-888-866-5797.
AFTER EACH USE, wipe external
2.
surfaces of the tool with clean cloth.
3.
Periodically check the
threads for damage.
4.
Keep clean and free from dirt,
grease and grit.
5.
Store tool in its Carrying
Case when not in use.
Page 9
Advertisement
Table of Contents
