Do you have a question about the B07VX43R7N and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for AMAZON COMMERCIAL B07VX43R7N
Page 1
Non-contact Voltage Tester with LCD Display for Working, Double Mould, Flashlight Voltímetro sin Contacto con Pantalla LCD para Trabajos, Detector de Moho, Linterna Testeur de Tensions sans Contact Doté d’Un Écran LCD pour Effectuer des Travaux, Double Moulage, Lampe-Torche B07VX43R7N...
IMPORTANT SAFEGUARDS Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following: WARNING...
Page 4
• This product must be used by trained users only. • Insulation type and thickness, distance from the voltage source, shielded wires, and other factors may affect reliable operation. If in doubt, use other methods to verify live voltage. • Do not use if the product appears damaged or if it is not working properly.
Battery Warnings • Always insert batteries correctly with regards to polarity (+ and –) marked on the battery and the product. • Do not mix old and new batteries or batteries of different types or brands. • Exhausted batteries should be immediately removed from product and properly disposed.
Explanation of Symbols WARNING The signal word that indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. NOTICE Indicates a practical tip, advice or practice not related to personal injury. Risk of electric shock! This symbol indicates that, under normal use, hazardous voltages may be present.
Intended Use • This tester is intended to test the voltage at insulated cables (non-contact) in the 12 V~ to 1000 V~ range. • This tester may be used only under the conditions and for the purposes for which it was designed.
Page 9
Switching the product off Press the on/off button again. The tester beeps twice and the display goes off. NOTICE If the on/off button is pressed and held for more than 5 seconds, it is regarded as an error. The tester beeps twice and then it switches off.
Page 10
High voltage mode (100 V~ to 1000 V~) Place the tip of the product near a voltage source. If the product detects voltage within its detection range, the LED indicator flashes red and the audio alarm sounds rapidly. Low voltage mode (12 V~ to 1000 V~) Press and hold the on/off button for 2 seconds.
Low battery indication Replace the batteries if the "Working" indicator does not lights up. When the product is on and the batteries are too low for reliable operation, the product beeps 3 times, the "Working" indicator flashes red 3 times and then it switches off. Replace batteries immediately.
3. Refit the battery compartment cover. 4. Test on known live circuit within the rated AC voltage range of the product. Cleaning and Maintenance NOTICE Switch the product off before cleaning. NOTICE During cleaning do not immerse the product in water or other liquids. Never hold the product under running water.
Specifications 100 V~ to 1000 V~ Voltage detection range: 12 V~ to 1000 V~ Frequency range: 50/60 Hz 2 x AAA 1.5 V Power source: batteries 32 °F to 122 °F Operating temperature: (0 °C to 50 °C) 14 °F to 140 °F Storage temperature: (-10 °C to 60 °C) Operating humidity:...
Page 14
Feedback and Help Love it? Hate it? Let us know with a customer review. AmazonCommercial is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product. amazon.com/review/ review‑your‑purchases# amazon.com/gp/help/customer/...
Page 15
amazon.com/AmazonCommercial MADE IN CHINA HECHO EN CHINA FABRIQUÉ EN CHINE V01-10/19...
Need help?
Do you have a question about the B07VX43R7N and is the answer not in the manual?
Questions and answers