Table of Contents
Advertisement
Storage humidity:
20 % to 80 % ( non-condensing )
Shipping humidity:
20 % to 80 % ( non-condensing )
Vibration Test
The packaged display shall be capable of passing sinusoidal vibration test as specified in follows.
Test condition as below :
1) Package sinusoidal vibration 7Hz, 1.05G acceleration, 20min/axe, 3axes
2) Random vibration,10-500 Hz, 1.47G RMS
The unit under test shall be run for a duration of 30 minute in :
Top and bottom side ( z axis ).
The unit shall suffer no visible cosmetic damage and should operate no degradation indisplay quality after
test.
Additionally, prior to production and prior to implementation of any design or manufacturing change that
might affect vibration performance, a minimum of 2 units shall be demonstrated to meet the requirements
of specification.
Drop Test
The packaged display shall be capable of passing drop test as specified in following specification without any
measurable degradation in performance or detectable mechanical or cosmetic damage.
Dropping way:
1 corner, 3 edges, 6 flats
Dropping Height: follow the below table
14
Chapter1
Advertisement
Table of Contents
