Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Advanced Lighting Systems LiveLED 100
- Page 1 InstallatIon InstRUCtIons livelED 100 Model NuMber ALS-LLED-100...
-
Page 2: Table Of Contents
The LiveLED 100 is a digital, full spectrum capable source comprised of 39.6 watts of Blue LEDs, 39.6 watts of Green LEDs, and 22 watts of Red LEDs. The LiveLED 100 features an integrated power supply and a DMX control panel with XLR in and out connectors. -
Page 3: Important Safety Instructions
2.0 Placement & Mounting Requirements The LiveLED 100, is designed to operate in an indoor or outdoor environment. The proper voltage required at the site is 110 - 240 VAC, 60/50 Hz. The unit draws 1 Amp at 120 volts. The LiveLED 100 is yoke mounted and is designed for operation in any orientation allowed by the yoke. - Page 4 Flashing Green indicates DMX operation is being executed STAND ALONE OPERATION To operate the LiveLED 100 as a stand alone unit, rotate the knobs on the Control Panel to activate the preset program desired (see preset program table below). MASTER/SLAVE OPERATION The master / slave control allows multiple units to operate in synchronization without an external con- troller.
-
Page 5: Preset Program Table
4.0 Preset Program Table STATIC COLORS: COLOR SNAP CHANGE: (white/salmon/red/blue/green/magenta/yellow/cyan) 8 Color snap change w/10 second pause BLUE 8 Color snap change w/5 second pause GREEN 8 Color snap change w/2 second pause MAGENTA 8 Color snap change w/1 second pause YELLOW 8 Color snap change w/0.5 second pause CYAN... -
Page 6: Dmx Control
If the unit is receiving a DMX signal, the green light on the control panel will illuminate. Setting the Base DMX Address As with all products that are DMX controlled, the LiveLED 100 requires that DMX channels be set to specific “addresses” in order that the unit will respond to a control unit. Using the adjustment knobs, set the desired DMX address on any address from 001 - 512. -
Page 7: Quick Settings
6.0 Quick Settings of Preset Colors & Effects Channel: Color Crossfades: DMX Value (Min): DMX Value (Max): Green Blue No Action Magenta Yellow Cyan Warm White Cool White Blue Magenta Red Magenta Turquoise Orange Light Blue Light Yellow Light Warm Pink Light Green Light Salmon Light Amber... -
Page 8: Resetting Dmx Programs
6.0 Quick Settings of Preset Colors & Effects (Cont.) Strobe: (Flash on/off & pause for time indicated) Red Strobe: 0.5 Red Strobe: 0.25 Red Strobe: 0.1 Blue Strobe: 0.5 Blue Strobe: 0.25 Blue Strobe: 0.1 Green Strobe: 0.5 Green Strobe: 0.25 Green Strobe: 0.1 Cool White Strobe: 0.5 Cool White Strobe: 0.25... -
Page 9: Troubleshooting
Remove and replace the fuses if needed. Plug in the power cord and the unit is ready for continued operation. For additional assistance or questions contact an authorized distributor or dealer for Advanced Lighting Systems, Inc. or contact the factory at: Advanced Lighting Systems, Inc. 519 Lincoln Road Sauk Centre, MN 56378 Tel: 320.352.0088... - Page 10 LIMITED WARRANTY Nexxus Lighting, Inc. warranties its products, excluding lamps, to be free from defects in material and/ or workmanship, under normal condition, use and service, for a period of two (2) years from the original invoice date (Five (5) Years for Red, Amber and Orange FlexLED and Border Light LED products and one (1) Year for Non-UL Listed Power Supplies).
Need help?
Do you have a question about the LiveLED 100 and is the answer not in the manual?
Questions and answers